What are the differences between water-in-sand coating and stone-like paint?

Release: Common questionsFLAT Official Website

Differences between water-in-sand coating and stone-like paint. Water-in-sand differs from other stone-like paints in raw materials. Water-in-sand usually uses fluorosilicone resin, and the emulsion content is higher than 40%, with water resistance, UV resistance, weather...


Water-in-water sandCoatings andStone imitation paintthe differences

Water-in-water sandand otherStone imitation paintthe raw materials differ
Water-in-sand coatings usually use fluorosilicone resin, with an emulsion content above 40%, and their water resistance, UV resistance and weather resistance are far superior to those of real stone paint products. Real stone paint usually uses pure acrylic and silicone-acrylic emulsion formulations, with an emulsion content of around 15%, and its aging resistance, water resistance, UV resistance and other properties after film formation are relatively poorer. PunaiWater-in-water sandFor the coating, apply another layer of PUNai topcoat on the surface; the coating film has a ceramic effect on the surface, and its exterior wall service life can reach more than 20 years.


Water-in-sand and othersStone imitation paintThe stone imitation fidelity differs
Water-in-water sandIt can achieve a 95% stone-like effect, with more realistic pattern layering that is close to natural stone, making it almost impossible for the eye to tell the difference. In contrast, the simulation effect of real stone paint reaches only 90% at best; especially with some special-pattern stones, it can imitate only the hue and texture, and the patterns cannot be represented at all.


The surface texture of water-in-sand coatings differs
Water-in-water sandIt has the texture of natural stone with a bush-hammered finish and also a granite-like effect. Although real stone paint has the texture of natural stone with a bush-hammered finish, it cannot achieve the colorful visual effect of imitation marble, while the surface gloss of water-in-water multicolor coatings lacks the texture of natural stone with a bush-hammered finish.


The stain resistance of water-in-sand differs
Water-in-water sandAlthough the surface is textured, the emulsion fully encapsulates the colored sand and effectively forms a film between the sand particles, making it hydrophobic and oleophobic, so the wall surface resists staining. Dust merely floats on the surface and will be washed away after rain. While otherStone imitation paint; the surface has a strong relief feel, but because the emulsion content is low, no effective film is formed between the colored sands, so dust can penetrate into the coating and is difficult to clean. In contrast, when Puna water-resistant sand-in-paint is paired with Puna weather-resistant dust-proof topcoat, the paint film cures to form a tight protective film with anti-stain and self-cleaning performance.


The application process of water-in-sand differs
Water-in-water sandThe product's modeling layer and pattern layer are formed in a single shot, effectively simplifying the spraying construction process. Water-in-water multicolor coatings, by contrast, require an additional multicolor intermediate coat.

The weight of water-in-sand coatings differs
The unit weight of water-in-sand is only 1/6 that of natural stone paint, reducing logistics costs.


The waterproof performance of water-in-sand coatings differs
Water-in-water sandandReal stone paintIt belongs to the same sand-textured formula and has a certain degree of breathability. At the same time, because the sand content is limited, the colored sand particle size is relatively small and uniform, and after film formation it can achieve breathability and waterproof performance. While otherStone imitation paint, the emulsion content is too low, the colored sand cannot form an effective film, and coupled with too many coarse sand particles, the coating film has a risk of water seepage.

Product composition: The liquid granite coating system consists of an alkali-resistant primer, sculpted aggregate, colored base coat, main material topcoat and water-based finishing coat. The alkali-resistant primer enhances the adhesion of this artistic coating to the substrate, reduces the substrate's water absorption, and seals against the penetration and migration of alkali and salts. The liquid granite main material can create colors, patterns, crystal cross-sections and three-dimensional textures, achieve sufficient hardness, and impart high weather resistance and other physical and chemical properties to the coating; the water-based finishing agent is on the outer layer of the coating system and provides water repellency and breathability, stain resistance, UV radiation resistance, and mold and algae resistance.


Liquid granite product effect: realistic granite effect, elegant and luxurious.
Liquid granite scope of application: large-area use on interior and exterior walls of all buildings, including villas, hotels, guesthouses, entertainment venues, commercial clubs, cement fiberboard, column surfaces, gypsum moldings, various partition boards, and ceilings.

Party and information verification

Party:Guangdong Fulaite Building Materials Co., Ltd. · FLAT. / Company Introduction

When the text involves standards, inspections or material parameters, please verify against the original materials listed in the text and the corresponding product conditions. The original samples and reports can bePage of qualifications and inspection reportConsult; models, batches, and project conditions are different, and relevant data should be confirmed separately.

For engineering cooperation and import and export procurement, you can provide the location, required area and intended texture,Contact FLAT for samples and quotes。

FLAT · Guangdong Fulaite Building Materials Co., Ltd.

Make architecture more beautiful.

Focus on flexible stone (MCM soft stone/soft porcelain), providing texture selection, product information and order production coordination.

Copyright © 2012-2026 Guangdong Fulaite Building Materials Co., Ltd. All Rights Reserved Yue ICP No. 16084041

Headquarters Address:No. 2, West of Tong'an Avenue, Dongfeng Town, Zhongshan City, Guangdong Province
Public Security RecordGuangdong Public Network Security Preparation No. 44200002005257