Common Engineering Problems and Solutions for Textured Paint

Release: Common questionsFLAT Official Website

1 Common local or overall flower in engineering 2 Flower caused by improper treatment of the base layer (1) Due to the display of textured paint in people's...

1 Common local or overall color mottling in engineering

2 Blossoming (color mottling) caused by improper substrate treatment

(1) Due toTextured paintWhat is presented to people is the effect of accumulated sand grains, and some manufacturers, in pursuit of a more natural simulated effect, use sand grains for the textured paint that are obtained by crushing natural ore; these are themselves transparent or semi-transparent and have relatively poor hiding power. In this case, if the substrate color is not uniform and there are color differences, after completingTextured paintAfterward, the texture paint may fail to cover the base color, causing the topcoat to appear blotchy. (2) In engineering construction, the materials used for leveling the substrate are all mortar- and putty-based, which are alkaline systems with a pH as high as 13 or above. If substrate curing does not meet the standard, the alkali in the substrate will migrate as moisture evaporates. After the texture paint is applied, the alkali from the substrate will migrate to the surface of the texture paint and cause blotchiness.

Solution: apply coatingTextured paintTreatment of the substrate before construction is particularly important. Before construction, floating dust, oil stains, etc. on the substrate must be cleaned. After treatment, apply a sealing primer to seal the alkali in the substrate. Although this step can have a certain effect, it cannot completely seal the alkali in the substrate. When substrate curing does not meet the standard, efflorescence will still occur, so curing of the substrate is crucial. Substrate curing standards: pH < 10, humidity < 10%, generally 28 d in winter and 14 d in summer. After the sealing primer dries, apply a primer with hiding power to even out the color of the substrate. Application must be uniform to avoidTextured paintexposed substrate and uneven color, and can also save the amount of textured topcoat paint used. Once such uneven color appears after the project is completed, it is very difficult to repair, and the only option is to redo it.

21112 Efflorescence caused by improper construction

(1)Textured paintConstruction sites for this type of work mostly use scaffolding. After the textured paint is applied and the scaffolding is removed, scaffold marks may appear on the wall, or uneven color may result from joints between work done at different times. (2) Each worker's skill level and application technique vary, which can cause differences in the surface effect of the textured paint; after the textured paint is completely dry, localized or overall uneven color may appear. (3) Construction in different weather conditions can also cause uneven color in textured paint. Because textured paint is a water-based coating that uses water as the dispersion medium and synthetic emulsion as the binder, it is greatly affected by the natural environment. When the temperature is too low, applying textured paint can prevent film formation or result in poor film formation and uneven color; construction in strong wind or rain can also cause uneven color in textured paint.

Solution: for texture paint construction, use suspended platforms as much as possible, and keep construction joints at the dividing lines; if there are no dividing joints, keep them at inconspicuous places such as internal and external corners as much as possible. When joints are unavoidable, apply masking tape at the joint, remove the masking tape after construction is completed, and then apply masking tape to the completed part before continuing, so as to avoid irregular joints. Train workers on relevant practices before construction and standardize construction methods. At the same time, protect items such as doors and windows, and avoid cross-construction during construction to prevent mutual contamination. Texture paint construction environment: ensure the ambient temperature is above 5 ℃ and the relative humidity is less than 80%; construction is not allowed in windy weather of level 4 or above, and construction is also not allowed in foggy weather, rainy weather, or weather that is about to rain. Pay more attention to the weather forecast before construction.

21113 Textured paintthe efflorescence of the material itself

Textured paints on the market vary widely, and textured paints made by different manufacturers all differ. Most manufacturers use color pastes for tinting, and the performance and weather resistance of each color paste differ; using low-grade color pastes or organic color pastes easily leads to fading and thus to uneven color. Some manufacturers also use natural colored sand to tint textured paints, which are rich in color and lifelike, giving a good visual effect; however, because it is made by crushing natural stone ore, and natural mineral resources are limited, and color differences between different mining areas are relatively large, color differences exist between different batches of textured paint. Artificially synthesized colored sand is rich in color and has very small color difference problems, but its color retention is poor and it easily fades, and its weather resistance is inferior to that of natural colored sand. The performance of the binders used in textured paints differs considerably; low-grade emulsions are also poor in water resistance, weather resistance and other aspects, and after rain, wind and sun exposure they will turn white, yellow, etc.

Solution:Textured paintEarly-stage engineering budgeting is very important during engineering construction. Calculate the amount of textured paint needed for each wall based on the consumption per square meter, and minimize the number of order batches of textured paint. This is because material from the same batch in textured paint production will not have color differences, while color differences may exist between batches. During construction, try to avoid using material from different batches on the same wall. When making textured paint, try to use pure acrylic emulsion with good performance. Considering cost issues, most manufacturers use styrene-acrylic emulsion, but when choosing emulsion, try to use emulsion with high cost performance. Styrene-acrylic emulsion and pure acrylic emulsion can also be used in combination. When using textured paint, avoid adding too much water. Since textured paint is tinted with color paste, adding too much water can also easily cause mottling of the textured paint during construction.

21114 Efflorescence caused by topcoat

Textured paintWhat is presented to people visually is the effect of accumulated sand, with strong texture and a rough surface; an existing drawback is that it easily accumulates dust in natural environments and is difficult to clean. To improve its stain resistance, a layer of varnish is usually applied to the surface after the textured paint has completely dried, but varnish generally has a certain gloss; during application of textured paint, it is impossible to make the surface roughness the same everywhere—some areas are relatively smooth—and applying varnish can increase the surface gloss and deepen the degree of color mottling.

Solution: Use spray application as much as possible when applying the topcoat; if roller application is used, roll evenly.Textured paintDuring construction, the surface generally has areas of varying film-forming density. After the clear coat is applied, the mottling of the textured paint will be accentuated, so do not apply the topcoat too thickly. Note that when applying the topcoat, the textured paint must be completely dry first. Because the clear coat has good sealing properties, applying the topcoat before the textured paint is dry will prevent the moisture and additives inside the textured paint from escaping, causing the textured paint film to blister and bubble. When choosing a clear topcoat, try to use one with lower gloss or a matte finish.

212 Peeling, cracking, hollowing, chalking, and detachment

Textured paintThe aggregate is sand, and the coating film is much thicker than that of latex paint. Improper construction or poor product quality can easily cause problems. First, when substrate curing does not meet standards, applying texture paint on an insulated substrate or on a windward face with strong wind will cause the texture paint to dry too quickly on the surface, trapping moisture and additives from the substrate inside so they cannot evaporate, causing hollowing, peeling and cracking of the texture paint layer. Construction at too low a temperature will prevent the texture paint from forming a film or forming a good film, leaving hidden risks in the project. Although some additives can lower the minimum film-forming temperature of texture paint, at too low a temperature it still cannot form a film or forms a poor film, making the texture paint's weather resistance particularly poor and prone to chalking and peeling.

Solution:Textured paintDuring construction, avoid working in direct sunlight or on windy surfaces as much as possible. Construction must not be carried out when the ambient temperature is below 5 °C. Construction in winter should be avoided as much as possible.

3 Conclusion

Textured paintThey are used more and more in projects, bringing people beauty while requiring strict control of project quality to minimize project problems. First, the preliminary budget for a project must be done properly, solving possible problems in the bud; second, there must be a construction team with strong technical level and professional quality, so as to ensure the final quality of the project; third, products of better quality should be selected, supporting products should be used as much as possible, and construction should follow the product's construction process; when supporting products are not used, communicate with the relevant technical personnel in a timely manner to minimize risks. Once a textured coating project has problems, it is very difficult to repair; the only option is to identify the cause and redo the construction. The losses caused by all this are incalculable, so to ensure the quality of textured projects, one must think more and do more, and strictly control quality.

Party and information verification

Party:Guangdong Fulaite Building Materials Co., Ltd. · FLAT. / Company Introduction

When the text involves standards, inspections or material parameters, please verify against the original materials listed in the text and the corresponding product conditions. The original samples and reports can bePage of qualifications and inspection reportConsult; models, batches, and project conditions are different, and relevant data should be confirmed separately.

For engineering cooperation and import and export procurement, you can provide the location, required area and intended texture,Contact FLAT for samples and quotes。

FLAT · Guangdong Fulaite Building Materials Co., Ltd.

Make architecture more beautiful.

Focus on flexible stone (MCM soft stone/soft porcelain), providing texture selection, product information and order production coordination.

Copyright © 2012-2026 Guangdong Fulaite Building Materials Co., Ltd. All Rights Reserved Yue ICP No. 16084041

Headquarters Address:No. 2, West of Tong'an Avenue, Dongfeng Town, Zhongshan City, Guangdong Province
Public Security RecordGuangdong Public Network Security Preparation No. 44200002005257