Common problems in the use of multicolor paint

Release: Common questionsFLAT Official Website

During use of multicolor paint, a series of problems may arise due to long-term exposure to air or impurities mixed into the multicolor paint. These common problems mainly include...

Multicolor paintDuring use, due to long-term exposure to the air, or impurities mixed into multicolor paint and other reasons, a series of usage problems will arise. These common problems mainly include floating layers of multicolor paint, bleeding of multicolor paint, and turbidity of the dispersion medium, flocculation of the dispersion medium into blocks, agglomeration, etc. Below, the editor will introduce in detail the common problems in the use of Jinan multicolor paint:

I.Multicolor paintthe floating layer. The floating layer of multicolor paint refers to a portion of the particles in the finished bucket floating on the surface of the protective glue solution, covering the entire liquid surface in the bucket with a certain thickness. These floating particles are directly exposed to the air, causing the protective glue film wrapped around the particle surface to gradually thin due to evaporation until it breaks down and is lost, seriously affecting the uniformity, workability and decorative effect of the coating film.

II.Multicolor paintColor bleeding and turbidity of the dispersion medium. In multicolor coatings, the dispersion medium clearly takes on the same color as the color particles, or the dispersion medium becomes a milky turbid liquid; in severe cases, many fine flaky substances appear in the turbid liquid. The main cause of this phenomenon is that the gel protective film on the surface of the color particles is not strong enough and is too fragile; the pigments, fillers, additives, etc. inside the color particles continuously permeate outward through the fragile protective film, gradually giving the dispersion medium the color of the color particles and resulting in turbidity. The main reason the protective film is not strong enough and is too fragile is that the concentration of the non-solvent in the dispersion medium is insufficient.

III. The dispersion medium flocculates into lumps and agglomerates, forming a cotton-wool-like colloid that is difficult to disperse and wraps all the colored granules inside. Moreover, the longer it is stored, the more serious the problem becomes. The main cause of this phenomenon is that the pH of the dispersed phase and the dispersion medium is unsuitable; in particular, the alkalinity of the dispersion medium is too high, causing the polymer compounds in the dispersion medium to gradually agglomerate into lumps of various sizes, some cotton-wool-like and some in reticular cohesive masses.

IV. Dull, lusterless colored granules. Most cellulose-based thickeners, defoamers, and some types of pigments have a matting effect; white colored granules often have better gloss while other colors have poorer gloss. The reason is that white colored granules generally use neutral titanium dioxide as pigment and filler, and titanium dioxide has stable properties, so the gloss is better; certain types of pigments carry stronger alkalinity or acidity and readily cause the colored granules to lose gloss.

FLATWater-basedMulticolor paintIt is a new type of environmentally friendly coating introduced from abroad with advanced technology. It is made from a specially treated aqueous solution containing a variety of colored particles, and is a coating material with potential. The coating has excellent durability, strong adhesion, good ductility, and good water resistance, mildew resistance and stain resistance.

The coating surface is smoothly contoured, with colors interpenetrating; in color it can imitate natural granite and can even achieve a superb effect that surpasses nature. Although the color patterns originate from natural granite, they surpass granite: color shades are arbitrary and pattern sizes are arbitrary. Through a modern color design combined with a natural stone style, it creates a luxurious and dignified decorative effect; different joint designs can also expand the design space and enhance expressiveness, fully reflecting individuality.

Party and information verification

Party:Guangdong Fulaite Building Materials Co., Ltd. · FLAT. / Company Introduction

When the text involves standards, inspections or material parameters, please verify against the original materials listed in the text and the corresponding product conditions. The original samples and reports can bePage of qualifications and inspection reportConsult; models, batches, and project conditions are different, and relevant data should be confirmed separately.

For engineering cooperation and import and export procurement, you can provide the location, required area and intended texture,Contact FLAT for samples and quotes。

FLAT · Guangdong Fulaite Building Materials Co., Ltd.

Make architecture more beautiful.

Focus on flexible stone (MCM soft stone/soft porcelain), providing texture selection, product information and order production coordination.

Copyright © 2012-2026 Guangdong Fulaite Building Materials Co., Ltd. All Rights Reserved Yue ICP No. 16084041

Headquarters Address:No. 2, West of Tong'an Avenue, Dongfeng Town, Zhongshan City, Guangdong Province
Public Security RecordGuangdong Public Network Security Preparation No. 44200002005257