Why does real stone paint lose sand, and how to solve it?

Release: Common questionsFLAT Official Website

Many discussions about the sand loss problem of real stone paint have been found online. As a popular type of exterior wall coating, real stone paint has very excellent properties. However, some people find that their own real...

Many discussions have been found onlineReal stone paintDiscussion of the sand-shedding problem. As a very popular exterior wall coating, real stone paint has very excellent properties. But some people will find that their ownReal stone paintNot long after application, sanding-off occurred. What exactly is the cause? How can it be effectively solved and avoided?


According toFLATUnderstanding of engineering construction: some real stone paints lose a lot of sand during spraying, in severe cases up to about 1/3, causing waste. Besides the construction method, raw materials and formulas may also cause the above phenomenon. Currently used forReal stone paintThe sand comes in two types: artificial sand and natural sand. According to observation, real stone paint prepared with natural sand has less sand loss than when artificial sand is used.

This is related to the hardness and surface condition of the sand. Generally, sand with higher hardness and a denser, smoother surface is more prone to sand loss. In addition, when preparing real stone paint, the grading of the sand is also very important. Properly gradedReal stone paintNot only is there less sand loss during spraying, but the coating is also relatively tight. Therefore, when preparing real stone paint, it is recommended to use natural sand as much as possible and to ensure the sand has a certain gradation. In addition, the consistency of the coating also has a certain influence on sand loss during spraying.

When the coating is too thick, construction is difficult; when it is too thin, the initial adhesion of the sand when applied to the wall is too low, and both will cause the sand to fall off. ThereforeFLATThe company suggests that, where construction poses no difficulty, the consistency of the coating be increased as much as possible, which helps resolve the sand-shedding problem.

FLAT Contact Information

  • Phone / WeChat:17728489576
  • Email:17728489576@163.com
  • Headquarters address: No. 49-2, West Tong'an Avenue, Dongfeng Town, Zhongshan City, Guangdong Province

For material selection, engineering cooperation and foreign trade procurement, you canContact usCommunication.


The copyright of this article belongs to www.zsfulaite.com (Zhongshan Fulaite Coatings). If reproduced, please indicate the source.

Party and information verification

Party:Guangdong Fulaite Building Materials Co., Ltd. · FLAT. / Company Introduction

When the text involves standards, inspections or material parameters, please verify against the original materials listed in the text and the corresponding product conditions. The original samples and reports can bePage of qualifications and inspection reportConsult; models, batches, and project conditions are different, and relevant data should be confirmed separately.

For engineering cooperation and import and export procurement, you can provide the location, required area and intended texture,Contact FLAT for samples and quotes。

FLAT · Guangdong Fulaite Building Materials Co., Ltd.

Make architecture more beautiful.

Focus on flexible stone (MCM soft stone/soft porcelain), providing texture selection, product information and order production coordination.

Copyright © 2012-2026 Guangdong Fulaite Building Materials Co., Ltd. All Rights Reserved Yue ICP No. 16084041

Headquarters Address:No. 2, West of Tong'an Avenue, Dongfeng Town, Zhongshan City, Guangdong Province
Public Security RecordGuangdong Public Network Security Preparation No. 44200002005257