Annual Ring Wood No. 8

FLATRingwoodMade to order

Annual Ring Wood No. 8 is a FLAT architectural finish listed in the Ringwood category. This section brings together product reference images, series parameters, packaging references, and material selection checkpoints; samples, color codes, specifications, and delivery times are confirmed per order.

Product Information: Annual Ring Wood No. 8

Product information for Annual Ring Wood No. 8, for use in project material selection and international procurement discussions. Production is organized according to confirmed samples and orders, and products are not sold as uniform stock items.

Product Identity and Supply Method
Product NameAnnual Ring Wood No. 8
SectionRingwood
BrandFLAT
ManufacturerGuangdong Fulaite Building Materials Co., Ltd.
Production methodMade to order
Parameter basisEnterprise product parameter materials, version 261019, confirmed samples, and order agreement

Ringwood Series Reference

  • 1210 × 2970 mm:Each piece weighs approximately 27 kg

Reference materials of version 261019; specifications, color numbers, and approximate weight are checked according to the confirmed sample and order.

  • Confirm sample board:Color, texture, surface, and joint effect are confirmed separately.
  • Confirm measurement:Dimensions, thickness, approximate weight per piece and packaging data are recorded separately.
  • Confirm delivery:Quantity, packaging, destination and delivery time shall be confirmed in writing per the order.

Product series specifications and packaging parameters

FLAT building facade materials are produced according to order. The following are product parameter materials provided by the company for selection and packaging communication; it does not represent stock, and specifications, color numbers, and delivery periods are confirmed according to the order.

Weight and packaging data are estimated reference values. When the dimensions and thickness are not consistent with the old version of the display image, the new information referred to in this table and the written confirmation of both parties shall apply; the old image is only used for texture reference. The nominal area of a single sheet is calculated according to the marked size, excluding seam and cutting losses. The gross weight marked as 'to be reviewed according to the order' should be confirmed before being used for transportation calculation.

Ringwood Series Reference Parameters

Reference color series / texture: grey, white, black (other colors available upon request). The specific color numbers and surface effects are subject to confirmation of the sample.

Ringwood Product Parameter Data 261019 version; area is calculated based on the geometric dimensions indicated
Specification (mm)Thickness (mm)Approximate Weight (kg/sheet)Nominal area (m²/pc)Reference packaging (sheets/boxes)Reference packaging size (mm)Reference gross weight (kg)
1210 × 2970Information not listed, confirm according to the order273.5937151260 × 3050 × 700475

Source: Product parameter data provided by Guangdong Fulaite Building Materials Co., Ltd., 261019 version; specifications, thickness, weight, color and packaging are listed separately. There may be processing and measurement deviations in size and weight, and the actual delivery shall be based on the confirmed sample and order agreement.

How to verify testing and certification documents

The product on this page does not belong to the Flexible Stone (MCM soft porcelain / modified inorganic powder composite building facing sheet) system. When selecting materials, request the test report corresponding to this product and verify whether the sample name, specification and model, manufacturer, test basis, and tested items are consistent with this product; reports for other material categories cannot be used as a substitute.

Original reports and certificates entry:FLAT Qualifications and Test Reports。

Texture References and Source Materials: Annual Ring Wood No. 8

The original product images and descriptions are retained below; historical specifications shown in the images are not to be used directly as the basis for current orders. The current publicly available reference parameters are subject to the 261019 version of the materials above and the order confirmation results.

How to check the testing and certification materials

  • Product Consistency:Check the name, model, specification and production unit of the report, and do not substitute with a report of another type of material.
  • Project consistency:Check the inspected items, testing methods, conditions, and conclusions; corporate system certification is not equivalent to performance testing of each product.
  • Consistent range:ISO and CCC certificates cover which products and activities, as specified in the certificate text and attached pages.

Source entry:FLAT certificate and original inspection report. The flexible stone report is classified separately and is not used to determine the performance of gilded panels, coatings, or translucent stone.

Measurement specifications for size, weight and quotation

Initial calculation method for sheet material; actual supply requires additional splicing, cutting and packaging verification
Calculation itemCalculation method / UnitPrerequisites for use
Nominal area of single pieceLength (mm) × Width (mm) ÷ 1,000,000, unit m²Calculate according to the outer dimensions, which is not equal to the final effective tiling area
Initial calculation of sheet numberProject net area (m²) ÷ Nominal area per sheet (m²/sheet)Handle spare pieces according to layout, and then charge separately for cutting, corners, joints, and materials
Unit area weightActual single weight (kg) ÷ nominal area (m²)First confirm whether the weight is the net weight per sheet; packaging gross weight cannot be used for calculation.
Net weight of materialsNumber of supplied sheets x net weight per sheet (kg/sheet)Cases, trays, protective materials, etc. are charged separately and cannot be counted as the total weight of transportation

Engineering and foreign trade procurement: 6 confirmation list

  1. 01 · Location and subgrade

    Provide interior or exterior walls, building parts, base materials, site photos, and node requirements; suitability is confirmed according to specific materials and projects.

  2. 02 · Products and samples

    Record name, series, item number or color code; confirm color, texture, seam and corner sample.

  3. 03 · Specifications and measurement

    State the dimensions, thickness definition, deviation, net weight and pricing unit; materials and coatings are used with corresponding diameters.

  4. 04 · Testing and system

    Check the report object, project and conditions; confirm the matching auxiliary materials, construction methods and project acceptance requirements.

  5. 05 · Packaging and transportation

    Confirm the quantity, box weight, pallet, protection, loading and unloading, destination, and export label requirements for each box.

  6. 06 · Order and delivery

    Written confirmation of the minimum order quantity, price, taxes, delivery date, transportation responsibility, material preparation and replenishment method.

Common questions about product selection and materials

Are the test data on the page applicable to all products?

Not directly applicable. The inspection table corresponds to specific tested samples and reports; when purchasing, specific models, specifications, batches, items, and test conditions should be checked.

How are the size and weight in the picture used for procurement?

First check the version, model and unit of the data, then confirm the size deviation and weight measurement basis. The geometric calculation of nominal area does not include joint and cutting losses; the order quantity should be confirmed in combination with the layout.

Can the minimum order quantity, price, and delivery period be determined directly according to the website?

Inquire about the product, quantity, sample, packaging and delivery location, and obtain written confirmation. Products are produced according to the order, and the minimum order quantity and delivery time are confirmed according to the specific order.

Party and source of information

  • Party:FLAT · Guangdong Fulaite Building Materials Co., Ltd.; Company public information availableCompany Introduction。
  • Product information:The product parameter data version 261019 provided by the company and the texture display images of various products; specifications, approximate weight, and packaging are checked according to the confirmed sample, product files, and order agreements.
  • Inspection source:Certificate and inspection report original; The flexible stone data sheet has specified the report number, date, sample, and page number
  • Project consultation:Obtain material selection plan and quotation; Can be combinedProject CasesCommunication material effect.

Products and textures in the same category

BackRingwoodProduct List
FLAT · Guangdong Fulaite Building Materials Co., Ltd.

Make architecture more beautiful.

Focus on flexible stone (MCM soft stone/soft porcelain), providing texture selection, product information and order production coordination.

Copyright © 2012-2026 Guangdong Fulaite Building Materials Co., Ltd. All Rights Reserved Yue ICP No. 16084041

Headquarters Address:No. 2, West of Tong'an Avenue, Dongfeng Town, Zhongshan City, Guangdong Province
Public Security RecordGuangdong Public Network Security Preparation No. 44200002005257