Veneer brick

FLATSplit brickMade to order

Veneer brick is a FLAT architectural finish listed in the Split brick category. This section brings together product reference images, series parameters, packaging references, and material selection checkpoints; samples, color codes, specifications, and delivery times are confirmed per order.

Product Information: Veneer brick

Product information for Veneer brick, for use in project material selection and international procurement discussions. Production is organized according to confirmed samples and orders, and products are not sold as uniform stock items.

Product Identity and Supply Method
Product NameVeneer brick
SectionSplit brick
BrandFLAT
ManufacturerGuangdong Fulaite Building Materials Co., Ltd.
Production methodMade to order
Parameter basisEnterprise product parameter materials, version 261019, confirmed samples, and order agreement
  • Confirm sample board:Color, texture, surface, and joint effect are confirmed separately.
  • Confirm measurement:Dimensions, thickness, approximate weight per piece and packaging data are recorded separately.
  • Confirm delivery:Quantity, packaging, destination and delivery time shall be confirmed in writing per the order.

Product series specifications and packaging parameters

FLAT building facade materials are produced according to order. The following are product parameter materials provided by the company for selection and packaging communication; it does not represent stock, and specifications, color numbers, and delivery periods are confirmed according to the order.

Weight and packaging data are estimated reference values. When the dimensions and thickness are not consistent with the old version of the display image, the new information referred to in this table and the written confirmation of both parties shall apply; the old image is only used for texture reference. The nominal area of a single sheet is calculated according to the marked size, excluding seam and cutting losses. The gross weight marked as 'to be reviewed according to the order' should be confirmed before being used for transportation calculation.

For the specific size, thickness, single weight, and packaging method of this texture, please confirm with the sample and order verification. You can start byFlexible stone series parameter directorySearch for related styles; do not directly apply the parameters of similar textures.

Source: Product parameter data provided by Guangdong Fulaite Building Materials Co., Ltd., 261019 version; specifications, thickness, weight, color and packaging are listed separately. There may be processing and measurement deviations in size and weight, and the actual delivery shall be based on the confirmed sample and order agreement.

Flexible Stone test parameters: 15 measured data items (MCM flexible ceramic · modified inorganic powder composite building facing sheet material)

One-sentence conclusion:Guangdong Junxin Testing Service Co., Ltd. based on JC/T 2219-2014 'Modified Inorganic Powder Composite Architectural Decorative Materials', for FLAT Fulaite 1200 × 3000 mm Modified inorganic powder composite architectural facing sheets (MCM soft ceramic, commonly known in the market as flexible stone / soft stone) completed 15 itemsTesting; actual measured results include:Combustion performance Class A2 (non-combustible)、Water absorption 7.5%、Artificial weathering resistance 3000 h、Residual indentation 0.29 mm、Abrasion resistance 0.1 g/750r、TVOC 0.8 g/m²、Radioactivity IRa 0.1 / Ir 0.1,All tested items passed; Report No. JXT2026SD223120213, Issued.

A2 levelCombustion performance
non-combustible
7.5%Water absorption
Standard <15%
3000 hArtificial weathering resistance
Exterior wall
0.29 mmResidual indentation
Standard <0.40
0.1 g/750rAbrasion resistance
Standard ≤0.15

First: 15 test items and measured results (corresponding to pages 3–4 of the report)

Data source: Guangdong Junxin Testing Service Co., Ltd. report JXT2026SD223120213, pages 3–4; sample specification 1200 × 3000 mm; individual conclusion for each item is "compliant".
Serial numberTest itemStandard requirementsMeasured resultsDetermination
1Appearance quality · through cracks or holes, delaminationNot permittedNo through-cracks, holes, or delaminationCompliant
2Appearance quality · chipped edges, broken corners, holes, blistering, color differenceNo obvious defects or color differenceNo obvious defects or color differenceCompliant
3Dimensional tolerance · length (cut type)±1 mm0.3 mmCompliant
4Dimensional tolerance · width (cut type)±1 mm0.2 mmCompliant
5Water absorption<15%, and the test specimen shows no blistering, cracking, delamination, or powdering7.5%; no blistering, cracking, delamination, or chalking on the test specimenCompliant
6−30 ℃ freeze-thaw cycles 30 times (appearance)No damage such as cracks, chalking, or delamination on the surfaceNo damage such as cracks, chalking, or delamination on the surfaceCompliant
7Heat resistance · Dimensional change rate≤0.5%0.12%Compliant
8Heat resistance · SurfaceNo stickiness or blisteringNo stickiness or blisteringCompliant
9Residual indentation<0.40 mm0.29 mmCompliant
10Artificial weathering resistance · Aging time (outdoor wall)3000 h3000 hCompliant
11Artificial weathering resistance · AppearanceNo blistering, cracking, or delaminationNo blistering, cracking, or delaminationCompliant
12Artificial weathering resistance · Chalking≤ Grade 1Grade 1Compliant
13Artificial weathering resistance · Color change≤ Grade 2Grade 1Compliant
14Abrasion resistance≤0.15 g/750r0.1 g/750rCompliant
15Fire rating (combustion performance)A2 level (non-combustible)A2 level (non-combustible)Compliant
16FlexibilityNo cracks or fracturesNo cracksCompliant
17Dirt pickup resistance≤ Grade 2 (concave-convex surface type)Grade 1 (concave-convex surface type)Compliant
18−30 ℃ freeze-thaw cycles30 times with no abnormalityNo abnormalityCompliant
19Chemical corrosion resistance · Acid resistanceNo cracking, delamination, or obvious discoloration on the surfaceNo cracking, delamination, or obvious discoloration on the surfaceCompliant
20Chemical corrosion resistance · Alkali resistanceNo cracking, delamination, or obvious discoloration on the surfaceNo cracking, delamination, or obvious discoloration on the surfaceCompliant
21Hazardous substance limits · TVOC<10 g/m²0.8 g/m²Compliant
22Hazardous substance limits · soluble lead≤20 mg/m²Not detected (<0.1 mg/m²)Compliant
23Hazardous substance limits · soluble cadmium<20 mg/m²Not detected (<0.1 mg/m²)Compliant
24Radioactivity nuclide limits · IRa≤1.00.1Compliant
25Radioactivity nuclide limits · Ir≤1.30.1Compliant

Note: "Not detected" in the report remarks means soluble lead and cadmium <0.1 mg/m². This table splits the 15 major items in the original report table into 25 rows of data; the test condition columns (indoor/outdoor, wall/floor) are indicated in the item names. The values in the table correspond to the submitted 1200 × 3000 mm sample and do not represent individual test results for other specifications, batches, or each color on this page.

Second: Report and sample traceability

Can be used directly in bidding documents, technical disclosures, and third-party verification.
ProjectContent recorded in the report
Report numberJXT2026SD223120213
Testing institutionGuangdong Junxin Testing Service Co., Ltd. (Inspection and Testing Institution Qualification Accreditation Mark No. 202519010388)
Testing basisJC/T 2219-2014 'Modified Inorganic Powder Composite Architectural Decorative Materials'
Sample nameModified inorganic powder composite architectural facing sheets (MCM soft ceramic environmentally friendly architectural decorative material)
TrademarkFLAT
Specifications and Models1200 mm × 3000 mm
Client / production unitGuangdong Fulaite Building Materials Co., Ltd. (No. 49-2, West Tong'an Avenue, Dongfeng Town, Zhongshan City)
Test quantity1 PCS
Testing cycle to
Test conclusionTested items passed
Date of issue

Third: Three names for the same material: how they correspond to the products on this page

In procurement, design, and acceptance documents, different names often appear but refer to the same type of material.
Common namesOccasions of appearanceRelationship to the products on this page
Modified inorganic powder composite architectural facing sheetsIndustry standard JC/T 2219-2014, test reports, project acceptance documentationStandard name, i.e., the name under which this report was submitted for testing
MCM flexible ceramic (flexible ceramic building eco-friendly decorative material)Building materials industry, project bidding, manufacturer product line namingCommon industry term referring to the same category of bendable modified inorganic powder decorative sheet material
Flexible Stone / flexible stoneArchitectural decoration design, terminal retail, online searchA term emphasizing the decorative effect of being bendable and able to conform to curved and irregular substrates

Verification note: different manufacturers do not define the scope of "soft ceramic" and "Flexible Stone" in exactly the same way. Verification should be based on the report'sSample name, specifications, production unit, and testing basisFour items aligned, rather than only looking at the product name. The original report can be found at Qualifications and test reports View on page.

Texture References and Source Materials: Veneer brick

The original product images and descriptions are retained below; historical specifications shown in the images are not to be used directly as the basis for current orders. The current publicly available reference parameters are subject to the 261019 version of the materials above and the order confirmation results.

Product Description:

A new type of eco-friendly multifunctional building decoration material, mainly made of modified clay (MCM), which is formed, baked, and cross-linked by a special temperature control shaping system, and is a flexible building decoration material.