Liquid granite FLT-6013
Liquid granite FLT-6013 is a FLAT architectural finish listed in the Liquid marble (water-in-water) category. This section brings together product reference images, series parameters, packaging references, and material selection checkpoints; samples, color codes, specifications, and delivery times are confirmed per order.

Product Information: Liquid granite FLT-6013
Product information for Liquid granite FLT-6013, for use in project material selection and international procurement discussions. Production is organized according to confirmed samples and orders, and products are not sold as uniform stock items.
| Product Name | Liquid granite FLT-6013 |
|---|---|
| Section | Liquid marble (water-in-water) |
| Brand | FLAT |
| Manufacturer | Guangdong Fulaite Building Materials Co., Ltd. |
| Production method | Made to order |
| Parameter basis | Enterprise product parameter materials, version 261019, confirmed samples, and order agreement |
- Confirm sample board:Color, texture, surface, and joint effect are confirmed separately.
- Confirm measurement:Dimensions, thickness, approximate weight per piece and packaging data are recorded separately.
- Confirm delivery:Quantity, packaging, destination and delivery time shall be confirmed in writing per the order.
Product Technical Information
The 261019 version of this parameter data does not include this paint category. The base layer, system level, material consumption and packaging shall be in accordance with the corresponding product technical data, confirmed samples and order agreements.
How to verify testing and certification documents
The product on this page does not belong to the Flexible Stone (MCM soft porcelain / modified inorganic powder composite building facing sheet) system. When selecting materials, request the test report corresponding to this product and verify whether the sample name, specification and model, manufacturer, test basis, and tested items are consistent with this product; reports for other material categories cannot be used as a substitute.
Original reports and certificates entry:FLAT Qualifications and Test Reports。
Texture References and Source Materials: Liquid granite FLT-6013
The original product images and descriptions are retained below; historical specifications shown in the images are not to be used directly as the basis for current orders. The current publicly available reference parameters are subject to the 261019 version of the materials above and the order confirmation results.
Liquid granite (i.e., water-in-water building paint) is based on physical and chemical colloid technology and surface treatment technology, integrating various transformations of physical changes and chemical reactions of matter. It refines and wraps liquid water-based resins into colloidal water-based colored particles and uniformly suspends them in a specific water-based latex, finally forming a colorful, arbitrarily sized high-molecular liquid colloidal copolymer. It has all the characteristics of ordinary paint, as well as extremely strong weather resistance, crack resistance and environmental protection, and the characteristics of imitating granite. In particular, the effect of imitating granite has reached a peak, making it indistinguishable from the real thing. This technology originates from the synthesis concept of architectural coatings and also transcends the cognitive concept of building materials, which is a major innovation of architectural coatings.
Product advantages:
Luxurious appearance like that of marble paint;
Waterproof and sunproof to extend the life of buildings;
Corrosion, weathering, and non-toxic;
High cost-performance, widely used, and easy to operate;
Excellent plasticity, capable of creating various reliefs and patterns;
High safety, no risk of falling off and injuring people;
Solve the load problem of the decorative surface;
Simple and convenient renovation and transformation again;
Construction process:;
Substrate treatment: Clean the dirt, dust, and other adhesives on the surface before construction, wait for the surface to dry, then apply the construction, with surface humidity <8%, PH <10, and then apply elastic waterproof leveling putty.}
Jointing: According to the design requirements, the wall is divided into sections, cut with special tools, and filled with special materials to create a smooth effect. During the construction of the thermal insulation base surface, cutting is not performed to ensure the integrity of the thermal insulation layer. The jointing gaps are marked according to the design requirements and protected during construction with paper tape.
Sealing Primer: Apply the sealing primer to the wall surface using a primer spray gun or roller.
Color Middle Coat: After the primer is dry, apply the colored middle coat paint using a spray gun or roller.
Sealing: Brush the color according to the design jointing gap color and protect it with masking tape.
Main Material: Spray the main material with a special liquid granite spray gun.
Transparent topcoat: After the main material is completely dry, apply transparent topcoat.
Construction temperature:
Apply between 5-35℃. Not recommended to apply at temperatures below 5℃ or above 40℃, or when humidity is greater than 80%. Do not apply during rain.
Storage temperature: 5-35℃ (avoid long-term placement in environments below 0℃).
Construction tools:
Trowels, spatulas, squares, rollers, wool brushes, special spray guns, etc.
How to check the testing and certification materials
- Product Consistency:Check the name, model, specification and production unit of the report, and do not substitute with a report of another type of material.
- Project consistency:Check the inspected items, testing methods, conditions, and conclusions; corporate system certification is not equivalent to performance testing of each product.
- Consistent range:ISO and CCC certificates cover which products and activities, as specified in the certificate text and attached pages.
Source entry:FLAT certificate and original inspection report. The flexible stone report is classified separately and is not used to determine the performance of gilded panels, coatings, or translucent stone.
Measurement specifications for size, weight and quotation
| Project | Record unit | Check content |
|---|---|---|
| Net painting area | m² | Distinguish design area, opening deduction and node expansion area |
| System Structure | Track / layer | List the basic treatment, primer, intermediate coating, surface coating and top coating separately |
| Material consumption | kg/m², kg/drum | Determined according to specific products, coating thickness, base material, and samples; no general fixed coefficient is set. |
| Price range | RMB/kg, RMB/barrel, RMB/m² | Please indicate whether the price is for materials only or inclusive of construction, and verify taxes, transportation, and auxiliary materials |
Engineering and foreign trade procurement: 6 confirmation list
01 · Location and subgrade
Provide interior or exterior walls, building parts, base materials, site photos, and node requirements; suitability is confirmed according to specific materials and projects.
02 · Products and samples
Record name, series, item number or color code; confirm color, texture, seam and corner sample.
03 · Specifications and measurement
State the dimensions, thickness definition, deviation, net weight and pricing unit; materials and coatings are used with corresponding diameters.
04 · Testing and system
Check the report object, project and conditions; confirm the matching auxiliary materials, construction methods and project acceptance requirements.
05 · Packaging and transportation
Confirm the quantity, box weight, pallet, protection, loading and unloading, destination, and export label requirements for each box.
06 · Order and delivery
Written confirmation of the minimum order quantity, price, taxes, delivery date, transportation responsibility, material preparation and replenishment method.
Common questions about product selection and materials
Are the test data on the page applicable to all products?
Not directly applicable. The inspection table corresponds to specific tested samples and reports; when purchasing, specific models, specifications, batches, items, and test conditions should be checked.
How are the size and weight in the picture used for procurement?
First check the version, model and unit of the data, then confirm the size deviation and weight measurement basis. The geometric calculation of nominal area does not include joint and cutting losses; the order quantity should be confirmed in combination with the layout.
Can the minimum order quantity, price, and delivery period be determined directly according to the website?
Inquire about the product, quantity, sample, packaging and delivery location, and obtain written confirmation. Products are produced according to the order, and the minimum order quantity and delivery time are confirmed according to the specific order.
Party and source of information
- Party:FLAT · Guangdong Fulaite Building Materials Co., Ltd.; Company public information availableCompany Introduction。
- Product information:The product parameter data version 261019 provided by the company and the texture display images of various products; specifications, approximate weight, and packaging are checked according to the confirmed sample, product files, and order agreements.
- Inspection source:Certificate and inspection report original; The flexible stone data sheet has specified the report number, date, sample, and page number
- Project consultation:Obtain material selection plan and quotation; Can be combinedProject CasesCommunication material effect.








WhatsApp
Guangdong Public Network Security Preparation No. 44200002005257