How Much Water-in-Sand Is Needed per Square Meter: Material Names and Sample Selection Data

Release: Industry newsFLAT Official WebsiteThis text is organized:

How Much Water-in-Sand Is Needed per Square Meter. Material Consumption Requires First Clarifying Whether It Is Dry Material, Wet Material, Net Construction Quantity, or Procurement Quantity. Substrate Roughness, Texture Effect, Number of Coats, and Loss Will All Change Actual Consumption — the Entire Project Cannot Be Estimated Based on Material Name Alone.

First look at the conclusion

Material usage must first be clarified as dry material, wet material, net installation quantity, or purchase quantity. Substrate roughness, texture effect, number of coats, and loss all change actual consumption; the entire project cannot be estimated based on material name alone.

Usage calculation should retain measured evidence.

  • Make a sample on a substrate consistent with the site, and record the effective area and actual consumption.
  • The procurement quantity is calculated as the measured unit consumption multiplied by the net construction area, with loss and reserve quantities considered separately.
  • Packaging specifications, residual amount in the opened pail, and consumption for different processes should be recorded separately and must not be mixed into the net consumption of the main material.
Material selection and documentation checklist
Checklist itemInformation or conditions to be confirmed
Unit of measurementkg, L, square meters and their corresponding relationships
Measured conditionsSubstrate, effect, number of coats and mock-up area
Procurement scopeNet usage, loss, material preparation, and packaging

Usage calculation requires a sample under the same conditions first.

First determine the product, substrate roughness, target texture and number of application coats. Make a sample board whose area can be accurately recorded, and record the actual consumption before and after application, to avoid treating the nominal capacity of the bucket directly as the effective application area.

Convert the measured unit consumption into procurement requirements

Measured unit consumption (kg/㎡) = actual consumption of the sample (kg) ÷ effective area of the sample (㎡). Net demand for the main material (kg) = net construction area (㎡) × measured unit consumption (kg/㎡). Loss and reserve quantities are listed separately, and the purchase quantity is checked against the packaging specifications.

Do not calculate primer, main material and topcoat together

Quotation and material requisition records should separate different processes. Material wet weight, dry film mass and packaging gross weight are not the same basis, and the sample usage of the main material cannot replace the usage of leveling, primer and topcoat.

Scope of This Page and Materials

Material selection and documentation checklist
Checklist itemInformation or conditions to be confirmed
Discussion topicsHow much water-in-sand paint is needed per square meter
Material categoryWater-in-water sand
Nature of the materialMaterial selection notes; specific performance is subject to the corresponding product documentation and reports

Original images and videos

How much water-in-sand paint is needed per square meter, original image 1
Images or video materials retained from the original text. Appearance display does not replace product parameters, testing or engineering acceptance.
How much water-in-sand paint is needed per square meter, original image 2
Images or video materials retained from the original text. Appearance display does not replace product parameters, testing or engineering acceptance.
How much water-in-sand paint is needed per square meter, original image 3
Images or video materials retained from the original text. Appearance display does not replace product parameters, testing or engineering acceptance.
How much water-in-sand paint is needed per square meter, original image 4
Images or video materials retained from the original text. Appearance display does not replace product parameters, testing or engineering acceptance.

Material source and scope of application

    This article is a material selection and documentation verification note. The table lists items to be confirmed and does not indicate that the corresponding product has obtained a certain value or grade.

    Party and information verification

    Party:Guangdong Fulaite Building Materials Co., Ltd. · FLAT. / Company Introduction

    When the text involves standards, inspections or material parameters, please verify against the original materials listed in the text and the corresponding product conditions. The original samples and reports can bePage of qualifications and inspection reportConsult; models, batches, and project conditions are different, and relevant data should be confirmed separately.

    For engineering cooperation and import and export procurement, you can provide the location, required area and intended texture,Contact FLAT for samples and quotes。

    FLAT · Guangdong Fulaite Building Materials Co., Ltd.

    Make architecture more beautiful.

    Focus on flexible stone (MCM soft stone/soft porcelain), providing texture selection, product information and order production coordination.

    Copyright © 2012-2026 Guangdong Fulaite Building Materials Co., Ltd. All Rights Reserved Yue ICP No. 16084041

    Headquarters Address:No. 2, West of Tong'an Avenue, Dongfeng Town, Zhongshan City, Guangdong Province
    Public Security RecordGuangdong Public Network Security Preparation No. 44200002005257