Water-in-water sandHow should exterior wall coatings be applied?
First, we should understand what kind of material water-in-sand is, andWater-in-water sandWhere do the advantages lie?
Water-in-sand coating is a combination of water-in-water coating and real stone paint,It is a water-based architectural coating made from natural colored sand and pure acrylic emulsion supplemented with multifunctional additives into colloidal water-based colored particles. It has functions such as water repellency and breathability, stain resistance, UV radiation resistance, and mold and algae resistance. With colorful colors and random particle sizes, it creates a litchi-surface imitation marble effect; with rich colors and shapes, the imitation stone coating effect is realistic and comparable to natural granite. This thick-slurry architectural coating resists acid rain, alkali, mold and moisture, and remains bright even under changing weather conditions. It can be used for 15 years
I.Water-in-water sandHow to apply exterior wall coatings
1. UseWater-in-water sandWhen spraying exterior wall coatings on exterior walls, first prepare all materials, including mixing buckets, mixers, scrapers, rollers, protective film, etc. Next, carry out base layer treatment on the wall, such as cleaning it thoroughly and leveling the wall with wall putty, which can replace putty.
2. Then wait for it to dry completely. Once the wall surface is dry and flat, make dividing lines according to the design plan, and set level lines as marks. Next, apply color-separation tape, and withWater-in-water sandCompare the coatings.Next, the water-in-sand material needs to be sprayed: pour the pigment into a bucket, add a small amount of water to dilute it, and stir thoroughly until evenly mixed, then pour it into a dedicated spray gun.During construction, the selected spray gun nozzle diameter is approximately 6–8 mm, the pressure needs to reach above 8 kg, and the distance from the wall should be approximately 30–50 cm for uniform spraying. Generally, two coats are applied, with a usage of approximately 4 kg per square meter; then add a small amount of clean water and stir evenly, and apply two coats of clear topcoat protective paint uniformly with a spray gun.
Water-in-water sandExterior wall coating is a new type of environmentally friendly exterior wall building coating, with advantages such as high cost-effectiveness, high simulation fidelity, and long-lasting service life.FLATWater-in-sand is trustworthy!


WhatsApp
Guangdong Public Network Security Preparation No. 44200002005257