What causes color difference in flexible stone? Common situations and judgment methods

Release: Export to the seaFLAT Official Website

Direct answer: Flexible stone color difference may come from raw materials and production batches, texture design, inconsistency between samples and bulk goods, on-site lighting, laying direction, substrate or surface contamination, and cannot be judged only...


Direct answer

Color differences in flexible stone may come from raw materials and production batches, texture design, inconsistency between samples and bulk goods, on-site lighting, laying direction, and substrate or surface contamination; responsibility cannot be judged from a single photo alone. When handling, first pause mixed installation, divide by item number and batch, compare the confirmed sample with uninstalled products under uniform lighting, then check production, packaging, construction and cleaning records, and if necessary use the agreed colorimetric measurement method for re-verification.

First distinguish between design changes and abnormal color differences

Stone-texture materials are allowed to have design-driven natural variation, but being allowed to vary does not mean having no boundaries.Both parties in a purchase should specify the color range, texture direction, shade variation and layout method in the confirmed sample or mock-up. If the order does not define an acceptable range, disputes are difficult to judge from subjective descriptions alone.

National standard GB/T 11942-2022 specifies the method for measuring the chromaticity of colored building materials; the standard status is current.[1] Whether to apply this method to a specific flexible stone order should be confirmed by the product standard, contract, and testing plan; a general standard number cannot be directly applied to all products.

Six common causes of color differences in flexible stone

  1. Batch changes:Color deviation caused by different production times, raw materials or process conditions.
  2. Texture design:The same series itself has random variations in shade and texture.
  3. Sample deviation:The confirmation sample is not the actual production batch, or the sample has aged or become contaminated.
  4. Lighting effects:Natural light, warm light, wall-washing lights, and viewing angle change visual judgment.
  5. Layout direction:Texture direction, inversion and concentrated use of light and dark sheets cause regional differences.
  6. Construction impact:Substrate color, contamination from auxiliary materials, or improper surface cleaning or protection changes the appearance.

In what order should on-site judgment be carried out?

  1. Suspend further mixed loading or large-area construction and protect products that have not been unpacked.
  2. Record the order, item number, batch, carton number, construction area, and time of discovery.
  3. Photograph the overall view, details, labels and uninstalled products under uniform lighting and distance.
  4. Compare the confirmed sample, products from the same box, products from different boxes, and products from different batches separately.
  5. Check the layout direction, substrate, auxiliary materials, construction and cleaning records.
  6. Judge according to the contract or the method confirmed by both parties, and if necessary, entrust a qualified institution to conduct testing.

What evidence determines the liability judgment?

Key evidence includes the confirmed sample, the color range approved by both parties, the order item number, the batch, the outgoing inspection, the packaging labels, arrival photos and construction records. Only by linking product, logistics and construction evidence can responsibility for supply, transport, layout or on-site management be distinguished.

The industry standard for flexible facing bricks, JG/T 311-2011, is the current standard, but whether it applies to specific products still needs to be verified.[2] If the contract references this standard or other methods, ensure that the test object, conditions and judgment rules are consistent with the actual order.

How can color differences be prevented on the procurement side?

  • Use a unique item number and a dated confirmation sample;
  • For the same continuous area, try to use the same production batch;
  • Before shipment, sample multiple boxes and record the lighting and observation conditions;
  • Pre-construction trial layout to disperse variations in shade and natural texture;
  • When replenishing, provide the old batch, on-site leftover material and application locations;
  • Agree in the contract on the judgment method, evidence and handling process.

FLAT color difference communication should start with sealed samples

When purchasing FLAT flexible stone, the item number, texture direction, color range and natural variation should be confirmed at the sample stage, and sealed samples should be retained. For bulk goods and replenishment, the batch and application area should be confirmed again; when problems arise, communication should be based on the physical product, batch and on-site records, rather than comparing electronic images only.

Common Questions

Does color difference in flexible stone necessarily mean it is unqualified?

Not necessarily. A distinction should first be made between design-intended natural texture variation and abnormal differences beyond the scope confirmed by both parties, and then judged according to the confirmed sample, contract, batch, observation conditions and applicable standards. The specific conclusion should also be based on the corresponding product, project conditions and written confirmation by both parties.

Can a mobile phone photo serve as the sole evidence of color difference?

Not recommended. Mobile phones, white balance, screens and on-site lighting all affect color; physical objects, confirmation samples, batches, photos taken under uniform conditions and necessary measurement records should be retained at the same time. Specific conclusions should also be based on the corresponding product, project conditions and written confirmation materials from both parties.

Can different batches of flexible stone be mixed?

Comparison and pre-layout are required first. For continuous large-area walls, the same batch should usually be given priority; where mixing is unavoidable, the differences should be confirmed and visual concentration reduced through zoning or layout. Specific conclusions should also be subject to the corresponding product, project conditions and written confirmation by both parties.

Should color differences found after installation be removed immediately?

Losses should not be expanded immediately. First suspend construction, protect materials, record evidence and determine the cause, then the procurement, supplier, design and construction parties should determine adjustment, piece selection, replenishment or other plans.

How can color differences in flexible stone restocking be reduced?

When replenishing, provide the original item number, batch, confirmed sample, on-site leftover material and application photos, and reconfirm the sample before production. If an exact match cannot be achieved, the differences and the application locations should be explained in advance. The specific conclusion should also be subject to the corresponding product, project conditions and written confirmation by both parties.

Reference materials and authoritative sources

  1. Publishing organization:State Administration for Market Regulation, Standardization Administration of China;Material name:"Methods for Measuring the Color of Colored Building Materials";Document number:GB/T 11942-2022;Release date:2022/12/30;Supported content:National standard information, status, and applicable categories for colorimetric measurement of colored building materials;Original link:"Methods for Measuring the Color of Colored Building Materials";Visit date:2026-8-7.
  2. Publishing organization:National Center of Standards Evaluation, State Administration for Market Regulation;Material name:Industry standard "Flexible Facing Brick";Document number:JG/T 311-2011;Release date:2011 year 2 month 17 day;Supported content:The status, competent authority, release date and implementation date of the industry standard for flexible facing bricks;Original link:Industry standard "Flexible Facing Brick";Visit date:2026-8-7.

Related content and cooperation information

Party and information verification

Party:Guangdong Fulaite Building Materials Co., Ltd. · FLAT. / Company Introduction

When the text involves standards, inspections or material parameters, please verify against the original materials listed in the text and the corresponding product conditions. The original samples and reports can bePage of qualifications and inspection reportConsult; models, batches, and project conditions are different, and relevant data should be confirmed separately.

For engineering cooperation and import and export procurement, you can provide the location, required area and intended texture,Contact FLAT for samples and quotes。

FLAT · Guangdong Fulaite Building Materials Co., Ltd.

Make architecture more beautiful.

Focus on flexible stone (MCM soft stone/soft porcelain), providing texture selection, product information and order production coordination.

Copyright © 2012-2026 Guangdong Fulaite Building Materials Co., Ltd. All Rights Reserved Yue ICP No. 16084041

Headquarters Address:No. 2, West of Tong'an Avenue, Dongfeng Town, Zhongshan City, Guangdong Province
Public Security RecordGuangdong Public Network Security Preparation No. 44200002005257