How should flexible stone samples be evaluated? A standard operating guide for building materials channels

Release: Export to the seaFLAT Official Website

Direct answer: Flexible stone sample evaluation should not only look at color and texture, but should complete seven... aspects: identity, dimensions, appearance, flexibility performance, document correspondence, application conditions and mass-production reproducibility.


Direct answer

Flexible stone sample evaluation should not look only at color and texture; it should complete seven checks: identity, dimensions, appearance, flexibility performance, document correspondence, application conditions, and mass-production reproducibility. Distributors should assign a unique number to each sample, record the supplier, item number, batch, and date, and write the confirmation results into a sealed-sample form; for important projects, a scene mock-up should also be made, and then a small-batch order should be used to verify whether the sample and mass production are consistent.

The goal of sample evaluation is to reduce uncertainty about bulk goods

A good-looking sample does not equal a purchasable product.Distributors need to determine whether the sample identity is clear, whether the parameters can be verified, whether the project is applicable, whether the supplier can continuously replicate, and whether there is a basis for comparison if a dispute arises in the future.

The Product Quality Law requires products to conform to the quality conditions indicated by product instructions, physical samples and other means.[1] Therefore, a confirmed sample is not an ordinary display item, but an important record for procurement communication and mass-production acceptance.

Step one: establish a sample identity card

  • Internal sample number and supplier item number;
  • texture, color, thickness, specifications and sample size;
  • Supplier, receiving date and sample batch;
  • Corresponding product description, quotation and test report number;
  • Recommended application locations and limitations declared by the supplier;
  • Evaluator, evaluation date and final status.

The sample back, electronic images, quotations and database must all use the same number. Using only descriptions such as "light gray travertine" will lose traceability at the mass production, replenishment and customer complaint stages.

Step Two: Inspect samples under fixed conditions

  1. Appearance:Observe the color, texture, surface contamination, defects and edge condition under uniform lighting.
  2. Dimensions:Record the length, width, and thickness; do not merely copy the supplier's parameters.
  3. Flexibility demonstration:Demonstrate according to the supplier's instructions, and do not equate display bending with engineering performance on your own.
  4. Cleaning test:Select a small-scale method based on the target space and record surface changes.
  5. Combined observation:Place multiple samples side by side to judge natural variation, direction, and layout effect.

Third step: Check whether the documents correspond to the samples

Check the product name, item number, sample description, applicable standard, test items, and report date. When the testing institution has an accreditation mark, also confirm whether the corresponding testing capability falls within the accredited scope; CNAS provides a guide for querying and verifying laboratory accreditation qualifications and capability scope.[2]

A test report cannot replace a sample, and a sample cannot replace a report. The two must correspond to the same product to provide valid evidence for procurement decisions.

Step Four: Create scenario mock-ups

Hotel, catering, store and exterior wall projects should produce scene mock-ups based on the actual substrate, auxiliary materials, lighting, joints and details. Scene mock-ups should record substrate treatment, bonding materials, construction date, environment and curing conditions, so that subsequent problems can be traced.

When the project party confirms, it should be clear whether it is accepting the color, texture, layout, or the performance of the complete system. If only the appearance is confirmed, it cannot be assumed that the customer also accepts the construction and performance conditions.

Step five: seal the sample and move to trial orders

Retain purchaser samples, supplier samples, and necessary project site samples, marked with the date confirmed by both parties. The contract should reference the sample number and specify bulk sampling, permitted variation, packaging, and handling of anomalies.

A first small-batch order must verify bulk consistency, lead time, labels, packaging, transportation and feedback on arrival. Only after the trial order passes can samples enter the formal product library or regular SKUs.

FLAT sample evaluation recommendations

When applying to FLAT for flexible stone samples, it is recommended to also explain the customer type, application location, target texture, reference specifications, and estimated quantity. After receiving the samples, the unified numbering, documentation verification, scenario mock-up, and sealed sample processes should still be carried out, and cooperation should be decided based on actual results.

Common Questions

What items should mainly be examined in flexible stone samples?

At minimum, check sample identity, item number, color and texture, size and thickness, surface condition, flexibility performance, documentation correspondence and application conditions, and assess whether the supplier can replicate them in mass production. Specific conclusions should also be based on the corresponding product, project conditions and written confirmation by both parties.

Why must samples be numbered on the back?

The number can link to the electronic catalog, quotations, inspection data, contracts, and bulk goods. Without a unique number, customer-confirmed samples can easily lose correspondence with subsequent products, increasing the risk of wrong shipments and disputes.

Can a single sample determine color difference?

No. Color differences and natural texture variations require comparison of multiple pieces, multiple batches or full-size samples. A single small sample can only be used for preliminary observation and cannot represent the entire batch or the effect of large-area installation. Specific conclusions should also be based on the corresponding product, project conditions and written confirmation by both parties.

Can a bending demonstration prove the performance of flexible stone?

Cannot be proven on its own. A bending demonstration can only reflect the performance of that sample under specific conditions; engineering application still requires verification of the specific model, bending conditions, substrate, auxiliary materials and relevant documents. Specific conclusions should also be based on the corresponding product, project conditions and written confirmation by both parties.

How long should the confirmation sample be kept?

At minimum, it should cover order production, delivery, acceptance and the after-sales period agreed by both parties. For continuous replenishment projects, batch records should also be retained, and samples should be re-confirmed based on product changes. Specific conclusions should also be based on the corresponding product, project conditions and written confirmation by both parties.

Reference materials and authoritative sources

  1. Publishing organization:State Administration for Market Regulation;Material name:Product Quality Law of the People's Republic of China;Document number:—;Release date:Currently published text;Supported content:Product quality liability, product markings, conformity certificates, the quality conditions indicated by samples, and purchase inspection and acceptance;Original link:Product Quality Law of the People's Republic of China;Visit date:2026-8-7.
  2. Publishing organization:China National Accreditation Service for Conformity Assessment;Material name:Guidelines for Querying and Verifying Laboratory Accreditation Qualifications and Scope of Capability;Document number:CNAS-AL24-20201224;Release date:2021/2/23;Supported content:Inquiry and verification of the testing laboratory's accreditation status and scope of capability;Original link:Guidelines for Querying and Verifying Laboratory Accreditation Qualifications and Scope of Capability;Visit date:2026-8-7.

Related content and cooperation information

Party and information verification

Party:Guangdong Fulaite Building Materials Co., Ltd. · FLAT. / Company Introduction

When the text involves standards, inspections or material parameters, please verify against the original materials listed in the text and the corresponding product conditions. The original samples and reports can bePage of qualifications and inspection reportConsult; models, batches, and project conditions are different, and relevant data should be confirmed separately.

For engineering cooperation and import and export procurement, you can provide the location, required area and intended texture,Contact FLAT for samples and quotes。

FLAT · Guangdong Fulaite Building Materials Co., Ltd.

Make architecture more beautiful.

Focus on flexible stone (MCM soft stone/soft porcelain), providing texture selection, product information and order production coordination.

Copyright © 2012-2026 Guangdong Fulaite Building Materials Co., Ltd. All Rights Reserved Yue ICP No. 16084041

Headquarters Address:No. 2, West of Tong'an Avenue, Dongfeng Town, Zhongshan City, Guangdong Province
Public Security RecordGuangdong Public Network Security Preparation No. 44200002005257