First look at the conclusion
The spray effect of imitation stone paint is jointly affected by material condition, equipment, substrate and operation. Parameters such as spray gun nozzle diameter, air pressure and distance should be adjusted according to the specific product instructions and on-site samples; single-application parameters should not be treated as universal values.
Control points before and after spraying
- Before starting work, check the materials, equipment and substrate conditions, and do a test spray first to confirm the grain, texture and coverage effect.
- Keep the supporting processes on the same work face consistent, and arrange zoning, joints and protection according to the construction plan.
- Record dilution, equipment settings, weather and process intervals, so that any abnormality can be traced through the records.
| Checklist item | Information or conditions to be confirmed |
|---|---|
| Trial spray conditions | Sample boards, equipment settings, and material status |
| Appearance requirements | Particles, texture, coverage and zoning joints |
| Process records | Substrate, batch, interval and finished-product protection |
Scope of This Page and Materials
| Checklist item | Information or conditions to be confirmed |
|---|---|
| Discussion topics | Points to note when spraying water-in-sand: sharing FLAT Fulaite imitation stone paint knowledge video |
| Material category | Water-in-water sand |
| Nature of the material | Material selection notes; specific performance is subject to the corresponding product documentation and reports |
Original images and videos
Material source and scope of application
This article is a material selection and documentation verification note. The table lists items to be confirmed and does not indicate that the corresponding product has obtained a certain value or grade.


WhatsApp
Guangdong Public Network Security Preparation No. 44200002005257