First look at the conclusion
Finish installation must match the product, supporting materials and substrate conditions. First inspect the substrate, confirm the layout and nodes, then make samples according to the technical data; a short video must not be treated as a complete installation plan.
Coordination from pre-construction to acceptance
- Check substrate strength, flatness, hollowing, contamination, and moisture conditions, and first repair problems that affect quality.
- Check the bonding or coating system, material preparation, working time, and joint and detail solutions.
- Confirm the effect according to the mock-up and keep process records; after curing, carry out the corresponding inspections and finished-product protection.
| Checklist item | Information or conditions to be confirmed |
|---|---|
| Substrate inspection | Strength, flatness, hollowing and moisture conditions |
| Supporting system | Material model, formulation, and installation conditions |
| Detail acceptance | Joints, corners, edge finishing and protection of finished products |
Scope of This Page and Materials
| Checklist item | Information or conditions to be confirmed |
|---|---|
| Discussion topics | FLAT flexible stone tile wall installation guide, master it in one go! |
| Material category | Flexible stone |
| Nature of the material | Material selection notes; specific performance is subject to the corresponding product documentation and reports |
Original images and videos
Material source and scope of application
- Corresponding product and sample information
- FLAT original certificates and test reports
- National Standards Information Public Service Platform: JG/T 311-2011 "Flexible Facing Brick"
- Ministry of Housing and Urban-Rural Development: Notice on Prevention and Treatment of Common Quality Problems in Affordable Housing (2022)
This article is a material selection and documentation verification note. The table lists items to be confirmed and does not indicate that the corresponding product has obtained a certain value or grade. Standard inquiries are only used to verify material categories and scope of application and do not mean that all FLAT Fulaite products are tested according to the same standard.


WhatsApp
Guangdong Public Network Security Preparation No. 44200002005257