First look at the conclusion
Panel divisions, joints, and internal/external corners all affect both appearance and structural reliability. Dimensions and methods must be determined based on layout, substrate deformation, and project node requirements; a single joint width cannot be applied uniformly.
First lay out the pattern, then determine the joint method
- Incorporate door and window openings, wall corners, and deformation locations into the layout to avoid unreasonable joints in small, fragmented areas.
- Use jointing, sealing or dividing materials compatible with the finish system, and check the timing of cleaning and construction.
- First make a mock-up that can show corners, edges and joints, and confirm the lines, color, density and drainage closures.
| Checklist item | Information or conditions to be confirmed |
|---|---|
| Layout drawing | Division positions, door and window relationships, and corners |
| Material system | Sealing, pointing, or joint-division matching materials |
| Sample acceptance | Lines, colors, edges and joints |
Key points for observing the texture of this model
For split-face brick texture, the brick scale, texture direction, layout modulus, and jointing effect should be checked at the same time. Local photos cannot fully express the effect of the entire wall after assembly.
- Brick-pattern layout: module, direction and edges
- Joint sample boards: joint color, depth, and corners
Scope of This Page and Materials
| Checklist item | Information or conditions to be confirmed |
|---|---|
| Discussion topics | Split-face brick jointing construction video |
| Material category | Flexible stone |
| Nature of the material | Material selection notes; specific performance is subject to the corresponding product documentation and reports |
Original images and videos
Material source and scope of application
- Corresponding product and sample information
- FLAT original certificates and test reports
- National Standards Information Public Service Platform: JG/T 311-2011 "Flexible Facing Brick"
This article is a material selection and documentation verification note. The table lists items to be confirmed and does not indicate that the corresponding product has obtained a certain value or grade. Standard inquiries are only used to verify material categories and scope of application and do not mean that all FLAT Fulaite products are tested according to the same standard.


WhatsApp
Guangdong Public Network Security Preparation No. 44200002005257