First look at the conclusion
Panel divisions, joints, and internal/external corners all affect both appearance and structural reliability. Dimensions and methods must be determined based on layout, substrate deformation, and project node requirements; a single joint width cannot be applied uniformly.
First lay out the pattern, then determine the joint method
- Incorporate door and window openings, wall corners, and deformation locations into the layout to avoid unreasonable joints in small, fragmented areas.
- Use jointing, sealing or dividing materials compatible with the finish system, and check the timing of cleaning and construction.
- First make a mock-up that can show corners, edges and joints, and confirm the lines, color, density and drainage closures.
| Checklist item | Information or conditions to be confirmed |
|---|---|
| Layout drawing | Division positions, door and window relationships, and corners |
| Material system | Sealing, pointing, or joint-division matching materials |
| Sample acceptance | Lines, colors, edges and joints |
Scope of This Page and Materials
| Checklist item | Information or conditions to be confirmed |
|---|---|
| Discussion topics | How to make the internal and external corners of water-in-water multicolor paint more aesthetically pleasing |
| Material category | Water-in-water sand |
| Nature of the material | Material selection notes; specific performance is subject to the corresponding product documentation and reports |
Original images and videos

Material source and scope of application
This article is a material selection and documentation verification note. The table lists items to be confirmed and does not indicate that the corresponding product has obtained a certain value or grade.


WhatsApp
Guangdong Public Network Security Preparation No. 44200002005257