Earth-yellow travertine, light color (inorganic ink printing)
Earth-yellow travertine, light color (inorganic ink printing)Uses an inorganic ink printing process on the surface of Flexible Stone substrate. The substrate texture, printed pattern, and specific specifications are confirmed separately, and production is organized according to the confirmed samples and order.

Product Information: Earth-yellow travertine, light color (inorganic ink printing)
Product information for Earth-yellow travertine, light color (inorganic ink printing), for use in project material selection and international procurement discussions. Production is organized according to confirmed samples and orders, and products are not sold as uniform stock items.
| Product Name | Earth-yellow travertine, light color (inorganic ink printing) |
|---|---|
| Section | Inorganic ink printing series |
| Brand | FLAT |
| Manufacturer | Guangdong Fulaite Building Materials Co., Ltd. |
| Production method | Made to order |
| Parameter basis | Enterprise product parameter materials, version 261019, confirmed samples, and order agreement |
- Confirm sample board:Color, texture, surface, and joint effect are confirmed separately.
- Confirm measurement:Dimensions, thickness, approximate weight per piece and packaging data are recorded separately.
- Confirm delivery:Quantity, packaging, destination and delivery time shall be confirmed in writing per the order.
Product series specifications and packaging parameters
FLAT building facade materials are produced according to order. The following are product parameter materials provided by the company for selection and packaging communication; it does not represent stock, and specifications, color numbers, and delivery periods are confirmed according to the order.
Weight and packaging data are estimated reference values. When the dimensions and thickness are not consistent with the old version of the display image, the new information referred to in this table and the written confirmation of both parties shall apply; the old image is only used for texture reference. The nominal area of a single sheet is calculated according to the marked size, excluding seam and cutting losses. The gross weight marked as 'to be reviewed according to the order' should be confirmed before being used for transportation calculation.
3D printing travertine DY-DS series reference parameters
Reference color series / texture: select from the catalog. The specific color number and surface effect are subject to the confirmed sample.
| Specification (mm) | Thickness (mm) | Approximate Weight (kg/sheet) | Nominal area (m²/pc) | Reference packaging (sheets/boxes) | Reference packaging size (mm) | Reference gross weight (kg) |
|---|---|---|---|---|---|---|
| 600 × 1200 | 2.3-2.6 | 2.5-2.8 | 0.72 | 360 | 680 × 1280 × 1100 | 975 |
| 1200 × 2400 | 2.3-2.6 | 10.5-11 | 2.88 | 110 | 1300 × 2500 × 600 | 1260 |
| 1200 × 2800 | 2.7-3 | 14-14.5 | 3.36 | 100 | 1300 × 2900 × 600 | 1550 |
| 1200 × 3000 | 2.7-3 | 15.5-16 | 3.6 | 80 | 1300 × 3100 × 550 | 1390 |
For the specific size, thickness, single weight, and packaging method of this texture, please confirm with the sample and order verification. You can start byFlexible stone series parameter directorySearch for related styles; do not directly apply the parameters of similar textures.
Source: Product parameter data provided by Guangdong Fulaite Building Materials Co., Ltd., 261019 version; specifications, thickness, weight, color and packaging are listed separately. There may be processing and measurement deviations in size and weight, and the actual delivery shall be based on the confirmed sample and order agreement.
Flexible Stone test parameters: 15 measured data items (MCM flexible ceramic · modified inorganic powder composite building facing sheet material)
One-sentence conclusion:Guangdong Junxin Testing Service Co., Ltd. based on JC/T 2219-2014 'Modified Inorganic Powder Composite Architectural Decorative Materials', for FLAT Fulaite 1200 × 3000 mm Modified inorganic powder composite architectural facing sheets (MCM soft ceramic, commonly known in the market as flexible stone / soft stone) completed 15 itemsTesting; actual measured results include:Combustion performance Class A2 (non-combustible)、Water absorption 7.5%、Artificial weathering resistance 3000 h、Residual indentation 0.29 mm、Abrasion resistance 0.1 g/750r、TVOC 0.8 g/m²、Radioactivity IRa 0.1 / Ir 0.1,All tested items passed; Report No. JXT2026SD223120213, Issued.
non-combustible
Standard <15%
Exterior wall
Standard <0.40
Standard ≤0.15
First: 15 test items and measured results (corresponding to pages 3–4 of the report)
| Serial number | Test item | Standard requirements | Measured results | Determination |
|---|---|---|---|---|
| 1 | Appearance quality · through cracks or holes, delamination | Not permitted | No through-cracks, holes, or delamination | Compliant |
| 2 | Appearance quality · chipped edges, broken corners, holes, blistering, color difference | No obvious defects or color difference | No obvious defects or color difference | Compliant |
| 3 | Dimensional tolerance · length (cut type) | ±1 mm | 0.3 mm | Compliant |
| 4 | Dimensional tolerance · width (cut type) | ±1 mm | 0.2 mm | Compliant |
| 5 | Water absorption | <15%, and the test specimen shows no blistering, cracking, delamination, or powdering | 7.5%; no blistering, cracking, delamination, or chalking on the test specimen | Compliant |
| 6 | −30 ℃ freeze-thaw cycles 30 times (appearance) | No damage such as cracks, chalking, or delamination on the surface | No damage such as cracks, chalking, or delamination on the surface | Compliant |
| 7 | Heat resistance · Dimensional change rate | ≤0.5% | 0.12% | Compliant |
| 8 | Heat resistance · Surface | No stickiness or blistering | No stickiness or blistering | Compliant |
| 9 | Residual indentation | <0.40 mm | 0.29 mm | Compliant |
| 10 | Artificial weathering resistance · Aging time (outdoor wall) | 3000 h | 3000 h | Compliant |
| 11 | Artificial weathering resistance · Appearance | No blistering, cracking, or delamination | No blistering, cracking, or delamination | Compliant |
| 12 | Artificial weathering resistance · Chalking | ≤ Grade 1 | Grade 1 | Compliant |
| 13 | Artificial weathering resistance · Color change | ≤ Grade 2 | Grade 1 | Compliant |
| 14 | Abrasion resistance | ≤0.15 g/750r | 0.1 g/750r | Compliant |
| 15 | Fire rating (combustion performance) | A2 level (non-combustible) | A2 level (non-combustible) | Compliant |
| 16 | Flexibility | No cracks or fractures | No cracks | Compliant |
| 17 | Dirt pickup resistance | ≤ Grade 2 (concave-convex surface type) | Grade 1 (concave-convex surface type) | Compliant |
| 18 | −30 ℃ freeze-thaw cycles | 30 times with no abnormality | No abnormality | Compliant |
| 19 | Chemical corrosion resistance · Acid resistance | No cracking, delamination, or obvious discoloration on the surface | No cracking, delamination, or obvious discoloration on the surface | Compliant |
| 20 | Chemical corrosion resistance · Alkali resistance | No cracking, delamination, or obvious discoloration on the surface | No cracking, delamination, or obvious discoloration on the surface | Compliant |
| 21 | Hazardous substance limits · TVOC | <10 g/m² | 0.8 g/m² | Compliant |
| 22 | Hazardous substance limits · soluble lead | ≤20 mg/m² | Not detected (<0.1 mg/m²) | Compliant |
| 23 | Hazardous substance limits · soluble cadmium | <20 mg/m² | Not detected (<0.1 mg/m²) | Compliant |
| 24 | Radioactivity nuclide limits · IRa | ≤1.0 | 0.1 | Compliant |
| 25 | Radioactivity nuclide limits · Ir | ≤1.3 | 0.1 | Compliant |
Note: "Not detected" in the report remarks means soluble lead and cadmium <0.1 mg/m². This table splits the 15 major items in the original report table into 25 rows of data; the test condition columns (indoor/outdoor, wall/floor) are indicated in the item names. The values in the table correspond to the submitted 1200 × 3000 mm sample and do not represent individual test results for other specifications, batches, or each color on this page.
Second: Report and sample traceability
| Project | Content recorded in the report |
|---|---|
| Report number | JXT2026SD223120213 |
| Testing institution | Guangdong Junxin Testing Service Co., Ltd. (Inspection and Testing Institution Qualification Accreditation Mark No. 202519010388) |
| Testing basis | JC/T 2219-2014 'Modified Inorganic Powder Composite Architectural Decorative Materials' |
| Sample name | Modified inorganic powder composite architectural facing sheets (MCM soft ceramic environmentally friendly architectural decorative material) |
| Trademark | FLAT |
| Specifications and Models | 1200 mm × 3000 mm |
| Client / production unit | Guangdong Fulaite Building Materials Co., Ltd. (No. 49-2, West Tong'an Avenue, Dongfeng Town, Zhongshan City) |
| Test quantity | 1 PCS |
| Testing cycle | to |
| Test conclusion | Tested items passed |
| Date of issue |
Third: Three names for the same material: how they correspond to the products on this page
| Common names | Occasions of appearance | Relationship to the products on this page |
|---|---|---|
| Modified inorganic powder composite architectural facing sheets | Industry standard JC/T 2219-2014, test reports, project acceptance documentation | Standard name, i.e., the name under which this report was submitted for testing |
| MCM flexible ceramic (flexible ceramic building eco-friendly decorative material) | Building materials industry, project bidding, manufacturer product line naming | Common industry term referring to the same category of bendable modified inorganic powder decorative sheet material |
| Flexible Stone / flexible stone | Architectural decoration design, terminal retail, online search | A term emphasizing the decorative effect of being bendable and able to conform to curved and irregular substrates |
Verification note: different manufacturers do not define the scope of "soft ceramic" and "Flexible Stone" in exactly the same way. Verification should be based on the report'sSample name, specifications, production unit, and testing basisFour items aligned, rather than only looking at the product name. The original report can be found at Qualifications and test reports View on page.
Texture References and Source Materials: Earth-yellow travertine, light color (inorganic ink printing)
The original product images and descriptions are retained below; historical specifications shown in the images are not to be used directly as the basis for current orders. The current publicly available reference parameters are subject to the 261019 version of the materials above and the order confirmation results.
Earth yellow travertine, light color: substrate texture and printed pattern
FLAT earth yellow travertine light color (inorganic ink printing) uses flexible stone as the substrate, with inorganic ink printing and an earth yellow travertine light color pattern applied to the surface. The substrate retains a porous texture, and the printed color bands and irregular fine pores together form layers.
During sample selection, you can view the color distribution across the whole panel and the close-up texture at the same time, then compare with the project lighting and adjacent materials. The main color shown is light yellow, which is a description of the image's appearance; the final color code, batch effect and surface treatment are subject to the confirmed sample.
| color name | Earth yellow travertine, light color |
|---|---|
| Catalog texture grouping | Travertine |
| Main color shown in the image | Light yellow |
| Surface finish | The substrate surface of flexible stone is printed with inorganic ink |
| Brand and company | FLAT · Guangdong Fulaite Building Materials Co., Ltd. |
| Production method | Produce according to the confirmed sample and the order; confirm specifications, quantity, packaging and delivery time order by order. |
Color images and sample display

Material selection scenarios
- Hotel feature wall
- Homestay interior walls
- Commercial display wall surface
You can first make small samples in the above wall scenarios to confirm color, texture direction and joints. For exterior walls, damp areas or projects with special acceptance requirements, the test data, substrate, bonding system and detail practices for the corresponding model should be checked separately.
Reference specifications for the printed travertine series
Source: enterprise product parameter documentation (version 261019), corresponding to 3D printed travertine DY-DS series. The producible specifications for different patterns must be checked against the confirmed sample and order; the following data do not indicate stock availability.
| Specifications (mm) | Thickness (mm) | Approximate weight per piece (kg) | Nominal area per piece (m²) |
|---|---|---|---|
| 600 × 1200 | 2.3-2.6 | 2.5-2.8 | 0.72 |
| 1200 × 2400 | 2.3-2.6 | 10.5-11 | 2.88 |
| 1200 × 2800 | 2.7-3 | 14-14.5 | 3.36 |
| 1200 × 3000 | 2.7-3 | 15.5-16 | 3.6 |
Weight is an estimated reference value; area is calculated based on the marked dimensions and excludes joint gaps and cutting loss. Historical dimensions in the images do not replace current documentation and written confirmation by both parties.
Items to confirm for sample selection and orders
- Provide the color name, catalog identifier and planned application location to confirm the actual color code.
- Inspect the full panel, local texture, seams and corner samples under lighting.
- Confirm substrate specifications, matching auxiliary materials, testing scope, packaging, and delivery requirements separately.
Image source: print series catalogs and product materials provided by FLAT Fulaite.View certificates and testing documentationorContact us to confirm material selection and order requirements。
Flexible stone sample inspection data and report sources
The following data comes from the report issued by Guangdong Junxin Testing Service Co., Ltd. JXT2026SD223120213, issuance date ; The inspected name is 'Modified inorganic powder composite building decorative sheet material (MCM soft porcelain building environmental protection decorative material)', specification 1200 × 3000 mmThe production unit is Guangdong Fulaite Building Materials Co., Ltd.
Complete 15-item inspection data (including standard requirements, actual test results and individual conclusions), report traceability information and material name comparison, see this pageTesting parameters of flexible stoneChapter.
Data source:FLAT qualification and inspection report original. The test results correspond only to the samples, projects, and conditions mentioned in the report; specific models, batches, and engineering applicability must be checked against the corresponding documents. The certification scope of the ISO system certificate and the CCC certificate is verified according to the products and activities listed in the certificate.
Measurement specifications for size, weight and quotation
| Calculation item | Calculation method / Unit | Prerequisites for use |
|---|---|---|
| Nominal area of single piece | Length (mm) × Width (mm) ÷ 1,000,000, unit m² | Calculate according to the outer dimensions, which is not equal to the final effective tiling area |
| Initial calculation of sheet number | Project net area (m²) ÷ Nominal area per sheet (m²/sheet) | Handle spare pieces according to layout, and then charge separately for cutting, corners, joints, and materials |
| Unit area weight | Actual single weight (kg) ÷ nominal area (m²) | First confirm whether the weight is the net weight per sheet; packaging gross weight cannot be used for calculation. |
| Net weight of materials | Number of supplied sheets x net weight per sheet (kg/sheet) | Cases, trays, protective materials, etc. are charged separately and cannot be counted as the total weight of transportation |
Engineering and foreign trade procurement: 6 confirmation list
01 · Location and subgrade
Provide interior or exterior walls, building parts, base materials, site photos, and node requirements; suitability is confirmed according to specific materials and projects.
02 · Products and samples
Record name, series, item number or color code; confirm color, texture, seam and corner sample.
03 · Specifications and measurement
State the dimensions, thickness definition, deviation, net weight and pricing unit; materials and coatings are used with corresponding diameters.
04 · Testing and system
Check the report object, project and conditions; confirm the matching auxiliary materials, construction methods and project acceptance requirements.
05 · Packaging and transportation
Confirm the quantity, box weight, pallet, protection, loading and unloading, destination, and export label requirements for each box.
06 · Order and delivery
Written confirmation of the minimum order quantity, price, taxes, delivery date, transportation responsibility, material preparation and replenishment method.
Common questions about product selection and materials
Are the test data on the page applicable to all products?
Not directly applicable. The inspection table corresponds to specific tested samples and reports; when purchasing, specific models, specifications, batches, items, and test conditions should be checked.
How are the size and weight in the picture used for procurement?
First check the version, model and unit of the data, then confirm the size deviation and weight measurement basis. The geometric calculation of nominal area does not include joint and cutting losses; the order quantity should be confirmed in combination with the layout.
Can the minimum order quantity, price, and delivery period be determined directly according to the website?
Inquire about the product, quantity, sample, packaging and delivery location, and obtain written confirmation. Products are produced according to the order, and the minimum order quantity and delivery time are confirmed according to the specific order.
What is the fire rating of flexible stone (MCM soft porcelain)?
According to the test of JC/T 2219-2014, the combustion performance is A2 level (non-flammable), see Report JXT2026SD223120213, page 3. A2 level belongs to non-flammable material grade, which can be used for parts with specific requirements for combustion performance; the fireproof construction, base and supporting materials of the specific project still need to be executed according to the design documents and fire acceptance requirements.
How much water absorption rate does the flexible stone have? Will it absorb moisture and deform when used outdoors?
The moisture absorption rate of the inspected sample is 7.5%, the standard requirement is less than 15%, and the specimen has no bulging, cracking, delamination, or powdering; the thermal expansion rate is 0.12% (standard ≤0.5%); there are no cracks, powdering, or delamination on the surface after 30 cycles of freezing and thawing at -30 ℃. These results support outdoor wall application, but construction still needs to be carried out in accordance with the requirements of the base treatment and adhesive system.
Are modified inorganic powder composite architectural facade materials, MCM soft ceramic, flexible stone, and soft stone the same material?
The term used for the same type of material in different contexts: Modified inorganic powder composite building decorative sheet material is used in standards and inspection reports, commonly known as 'MCM Soft Porcelain' in the building materials industry, and as 'Flexible Stone' or 'Soft Stone' by designers and consumers. When verifying, the sample name, specification model, production unit, and inspection basis on the report should be aligned with the four items, and not just the product name.
How is the weather resistance of flexible stone, and how many years can it be used?
The report was completed under the conditions of the outdoor wall, with resistance to artificial aging for 3000 hours, no bubbles, cracks or delamination on the surface, 1st grade of fading and 1st grade of discoloration (the standards are ≤1st grade, ≤2nd grade). The duration of artificial aging is not equivalent to the warranty of actual service years; the actual lifespan depends on the base layer, adhesive system, climate zone, and maintenance methods, and needs to be assessed according to the project conditions.
Party and source of information
- Party:FLAT · Guangdong Fulaite Building Materials Co., Ltd.; Company public information availableCompany Introduction。
- Product information:The product parameter data version 261019 provided by the company and the texture display images of various products; specifications, approximate weight, and packaging are checked according to the confirmed sample, product files, and order agreements.
- Inspection source:Certificate and inspection report original; The flexible stone data sheet has specified the report number, date, sample, and page number
- Project consultation:Obtain material selection plan and quotation; Can be combinedProject CasesCommunication material effect.








WhatsApp
Guangdong Public Network Security Preparation No. 44200002005257