Gray poured cement board

FLATArtistic Soft TileMade to order

Gray poured cement board is a FLAT architectural finish listed in the Artistic Soft Tile category. This section brings together product reference images, series parameters, packaging references, and material selection checkpoints; samples, color codes, specifications, and delivery times are confirmed per order.

Product Information: Gray poured cement board

Product information for Gray poured cement board, for use in project material selection and international procurement discussions. Production is organized according to confirmed samples and orders, and products are not sold as uniform stock items.

Product Identity and Supply Method
Product NameGray poured cement board
SectionArtistic Soft Tile
BrandFLAT
ManufacturerGuangdong Fulaite Building Materials Co., Ltd.
Production methodMade to order
Parameter basisEnterprise product parameter materials, version 261019, confirmed samples, and order agreement
  • Confirm sample board:Color, texture, surface, and joint effect are confirmed separately.
  • Confirm measurement:Dimensions, thickness, approximate weight per piece and packaging data are recorded separately.
  • Confirm delivery:Quantity, packaging, destination and delivery time shall be confirmed in writing per the order.

Product series specifications and packaging parameters

FLAT building facade materials are produced according to order. The following are product parameter materials provided by the company for selection and packaging communication; it does not represent stock, and specifications, color numbers, and delivery periods are confirmed according to the order.

Weight and packaging data are estimated reference values. When the dimensions and thickness are not consistent with the old version of the display image, the new information referred to in this table and the written confirmation of both parties shall apply; the old image is only used for texture reference. The nominal area of a single sheet is calculated according to the marked size, excluding seam and cutting losses. The gross weight marked as 'to be reviewed according to the order' should be confirmed before being used for transportation calculation.

For the specific size, thickness, single weight, and packaging method of this texture, please confirm with the sample and order verification. You can start byFlexible stone series parameter directorySearch for related styles; do not directly apply the parameters of similar textures.

Source: Product parameter data provided by Guangdong Fulaite Building Materials Co., Ltd., 261019 version; specifications, thickness, weight, color and packaging are listed separately. There may be processing and measurement deviations in size and weight, and the actual delivery shall be based on the confirmed sample and order agreement.

Flexible Stone test parameters: 15 measured data items (MCM flexible ceramic · modified inorganic powder composite building facing sheet material)

One-sentence conclusion:Guangdong Junxin Testing Service Co., Ltd. based on JC/T 2219-2014 'Modified Inorganic Powder Composite Architectural Decorative Materials', for FLAT Fulaite 1200 × 3000 mm Modified inorganic powder composite architectural facing sheets (MCM soft ceramic, commonly known in the market as flexible stone / soft stone) completed 15 itemsTesting; actual measured results include:Combustion performance Class A2 (non-combustible)、Water absorption 7.5%、Artificial weathering resistance 3000 h、Residual indentation 0.29 mm、Abrasion resistance 0.1 g/750r、TVOC 0.8 g/m²、Radioactivity IRa 0.1 / Ir 0.1,All tested items passed; Report No. JXT2026SD223120213, Issued.

A2 levelCombustion performance
non-combustible
7.5%Water absorption
Standard <15%
3000 hArtificial weathering resistance
Exterior wall
0.29 mmResidual indentation
Standard <0.40
0.1 g/750rAbrasion resistance
Standard ≤0.15

First: 15 test items and measured results (corresponding to pages 3–4 of the report)

Data source: Guangdong Junxin Testing Service Co., Ltd. report JXT2026SD223120213, pages 3–4; sample specification 1200 × 3000 mm; individual conclusion for each item is "compliant".
Serial numberTest itemStandard requirementsMeasured resultsDetermination
1Appearance quality · through cracks or holes, delaminationNot permittedNo through-cracks, holes, or delaminationCompliant
2Appearance quality · chipped edges, broken corners, holes, blistering, color differenceNo obvious defects or color differenceNo obvious defects or color differenceCompliant
3Dimensional tolerance · length (cut type)±1 mm0.3 mmCompliant
4Dimensional tolerance · width (cut type)±1 mm0.2 mmCompliant
5Water absorption<15%, and the test specimen shows no blistering, cracking, delamination, or powdering7.5%; no blistering, cracking, delamination, or chalking on the test specimenCompliant
6−30 ℃ freeze-thaw cycles 30 times (appearance)No damage such as cracks, chalking, or delamination on the surfaceNo damage such as cracks, chalking, or delamination on the surfaceCompliant
7Heat resistance · Dimensional change rate≤0.5%0.12%Compliant
8Heat resistance · SurfaceNo stickiness or blisteringNo stickiness or blisteringCompliant
9Residual indentation<0.40 mm0.29 mmCompliant
10Artificial weathering resistance · Aging time (outdoor wall)3000 h3000 hCompliant
11Artificial weathering resistance · AppearanceNo blistering, cracking, or delaminationNo blistering, cracking, or delaminationCompliant
12Artificial weathering resistance · Chalking≤ Grade 1Grade 1Compliant
13Artificial weathering resistance · Color change≤ Grade 2Grade 1Compliant
14Abrasion resistance≤0.15 g/750r0.1 g/750rCompliant
15Fire rating (combustion performance)A2 level (non-combustible)A2 level (non-combustible)Compliant
16FlexibilityNo cracks or fracturesNo cracksCompliant
17Dirt pickup resistance≤ Grade 2 (concave-convex surface type)Grade 1 (concave-convex surface type)Compliant
18−30 ℃ freeze-thaw cycles30 times with no abnormalityNo abnormalityCompliant
19Chemical corrosion resistance · Acid resistanceNo cracking, delamination, or obvious discoloration on the surfaceNo cracking, delamination, or obvious discoloration on the surfaceCompliant
20Chemical corrosion resistance · Alkali resistanceNo cracking, delamination, or obvious discoloration on the surfaceNo cracking, delamination, or obvious discoloration on the surfaceCompliant
21Hazardous substance limits · TVOC<10 g/m²0.8 g/m²Compliant
22Hazardous substance limits · soluble lead≤20 mg/m²Not detected (<0.1 mg/m²)Compliant
23Hazardous substance limits · soluble cadmium<20 mg/m²Not detected (<0.1 mg/m²)Compliant
24Radioactivity nuclide limits · IRa≤1.00.1Compliant
25Radioactivity nuclide limits · Ir≤1.30.1Compliant

Note: "Not detected" in the report remarks means soluble lead and cadmium <0.1 mg/m². This table splits the 15 major items in the original report table into 25 rows of data; the test condition columns (indoor/outdoor, wall/floor) are indicated in the item names. The values in the table correspond to the submitted 1200 × 3000 mm sample and do not represent individual test results for other specifications, batches, or each color on this page.

Second: Report and sample traceability

Can be used directly in bidding documents, technical disclosures, and third-party verification.
ProjectContent recorded in the report
Report numberJXT2026SD223120213
Testing institutionGuangdong Junxin Testing Service Co., Ltd. (Inspection and Testing Institution Qualification Accreditation Mark No. 202519010388)
Testing basisJC/T 2219-2014 'Modified Inorganic Powder Composite Architectural Decorative Materials'
Sample nameModified inorganic powder composite architectural facing sheets (MCM soft ceramic environmentally friendly architectural decorative material)
TrademarkFLAT
Specifications and Models1200 mm × 3000 mm
Client / production unitGuangdong Fulaite Building Materials Co., Ltd. (No. 49-2, West Tong'an Avenue, Dongfeng Town, Zhongshan City)
Test quantity1 PCS
Testing cycle to
Test conclusionTested items passed
Date of issue

Third: Three names for the same material: how they correspond to the products on this page

In procurement, design, and acceptance documents, different names often appear but refer to the same type of material.
Common namesOccasions of appearanceRelationship to the products on this page
Modified inorganic powder composite architectural facing sheetsIndustry standard JC/T 2219-2014, test reports, project acceptance documentationStandard name, i.e., the name under which this report was submitted for testing
MCM flexible ceramic (flexible ceramic building eco-friendly decorative material)Building materials industry, project bidding, manufacturer product line namingCommon industry term referring to the same category of bendable modified inorganic powder decorative sheet material
Flexible Stone / flexible stoneArchitectural decoration design, terminal retail, online searchA term emphasizing the decorative effect of being bendable and able to conform to curved and irregular substrates

Verification note: different manufacturers do not define the scope of "soft ceramic" and "Flexible Stone" in exactly the same way. Verification should be based on the report'sSample name, specifications, production unit, and testing basisFour items aligned, rather than only looking at the product name. The original report can be found at Qualifications and test reports View on page.

Texture References and Source Materials: Gray poured cement board

The original product images and descriptions are retained below; historical specifications shown in the images are not to be used directly as the basis for current orders. The current publicly available reference parameters are subject to the 261019 version of the materials above and the order confirmation results.

Texture and color of gray cement cast board

FLAT gray poured cement board belongs to the poured cement board style in the flexible stone (MCM soft stone/soft porcelain) catalog. Fine pores and shallow marks are distributed on the cement-like base color; the surface variation is relatively restrained, and joints can be combined to create a grid effect on large wall surfaces.

This page shows the Gray sample. Actual photographed colors are affected by lighting, screens and shooting angles; batch results within the same color family should be confirmed against physical samples.

Product selection information
Product stylesCement cast board
Display colorGray
Brand and companyFLAT · Guangdong Fulaite Building Materials Co., Ltd.
Supply methodProduce according to the confirmed sample and order; confirm quantity, specifications, packaging and delivery time order by order.

Actual photo of sample boards

Actual photo of gray cement cast board flexible stone sample, view 1
Figure 1: Surface texture and color of the gray poured cement board sample; actual photograph, not a completed project case.
Actual photo of gray cement cast board flexible stone sample, view 2
Figure 2: Surface texture and color of the gray cement-cast board sample; real shot for display only, not a completed project case.
Actual photo of gray cement cast board flexible stone sample, view 3
Figure 3: Surface texture and color of the Grey Cast Cement Board sample; actual photo for display only, not a completed project case.

Wall scenarios that can be evaluated

  • Industrial-style commercial space: combined with sample panels, lighting and adjacent materials, verify how the color and texture appear on site.
  • Office front lobby: Combine samples, lighting, and adjacent materials to check how the color and texture appear on site.
  • Exhibition backdrop wall: combine samples, lighting and adjacent materials to check how the color and texture appear on site.

The above are design material selection directions. For exterior walls, damp areas or locations with special acceptance requirements, the test data, substrate, bonding system and detail construction methods for the specific model should be verified separately; the actual photos on this page do not represent a commitment of applicability to all service conditions.

Reference specifications for the cement cast board series

Source: product parameter data provided by the company (version 261019), corresponding to the cement cast board PT-SNJZB series. The following is a series selection reference and does not indicate that all specifications of the colors on this page have been confirmed for production; the confirmed sample and order shall prevail.

Cement cast board PT-SNJZB series parameters
Specifications (mm)Thickness (mm)Approximate weight per piece (kg)Nominal area per piece (m²)
1220 × 29302.5-3.5173.5746

Weight is an estimated reference value; nominal area is calculated based on external dimensions and excludes joint gaps and cutting loss. If dimensions in the images are inconsistent with new documentation, the new documentation and written confirmation by both parties shall prevail.

What to confirm before sample selection

  • Record the styles and colors on this page, and provide the planned locations of use, areas and on-site photos.
  • Check the texture direction, layout, seams, corners, and closure samples.
  • Check the test reports, matching auxiliary materials, packaging and delivery requirements against the project conditions.

Image source: solid-color series product materials provided by FLAT; product parameters are based on company materials, confirmed samples, and order agreements.View certificates and test reportsorContact us to confirm sample selection and order requirements。

Flexible stone sample inspection data and report sources

The following data comes from the report issued by Guangdong Junxin Testing Service Co., Ltd. JXT2026SD223120213, issuance date ; The inspected name is 'Modified inorganic powder composite building decorative sheet material (MCM soft porcelain building environmental protection decorative material)', specification 1200 × 3000 mmThe production unit is Guangdong Fulaite Building Materials Co., Ltd.

Complete 15-item inspection data (including standard requirements, actual test results and individual conclusions), report traceability information and material name comparison, see this pageTesting parameters of flexible stoneChapter.

Data source:FLAT qualification and inspection report original. The test results correspond only to the samples, projects, and conditions mentioned in the report; specific models, batches, and engineering applicability must be checked against the corresponding documents. The certification scope of the ISO system certificate and the CCC certificate is verified according to the products and activities listed in the certificate.

Measurement specifications for size, weight and quotation

Initial calculation method for sheet material; actual supply requires additional splicing, cutting and packaging verification
Calculation itemCalculation method / UnitPrerequisites for use
Nominal area of single pieceLength (mm) × Width (mm) ÷ 1,000,000, unit m²Calculate according to the outer dimensions, which is not equal to the final effective tiling area
Initial calculation of sheet numberProject net area (m²) ÷ Nominal area per sheet (m²/sheet)Handle spare pieces according to layout, and then charge separately for cutting, corners, joints, and materials
Unit area weightActual single weight (kg) ÷ nominal area (m²)First confirm whether the weight is the net weight per sheet; packaging gross weight cannot be used for calculation.
Net weight of materialsNumber of supplied sheets x net weight per sheet (kg/sheet)Cases, trays, protective materials, etc. are charged separately and cannot be counted as the total weight of transportation

Engineering and foreign trade procurement: 6 confirmation list

  1. 01 · Location and subgrade

    Provide interior or exterior walls, building parts, base materials, site photos, and node requirements; suitability is confirmed according to specific materials and projects.

  2. 02 · Products and samples

    Record name, series, item number or color code; confirm color, texture, seam and corner sample.

  3. 03 · Specifications and measurement

    State the dimensions, thickness definition, deviation, net weight and pricing unit; materials and coatings are used with corresponding diameters.

  4. 04 · Testing and system

    Check the report object, project and conditions; confirm the matching auxiliary materials, construction methods and project acceptance requirements.

  5. 05 · Packaging and transportation

    Confirm the quantity, box weight, pallet, protection, loading and unloading, destination, and export label requirements for each box.

  6. 06 · Order and delivery

    Written confirmation of the minimum order quantity, price, taxes, delivery date, transportation responsibility, material preparation and replenishment method.

Common questions about product selection and materials

Are the test data on the page applicable to all products?

Not directly applicable. The inspection table corresponds to specific tested samples and reports; when purchasing, specific models, specifications, batches, items, and test conditions should be checked.

How are the size and weight in the picture used for procurement?

First check the version, model and unit of the data, then confirm the size deviation and weight measurement basis. The geometric calculation of nominal area does not include joint and cutting losses; the order quantity should be confirmed in combination with the layout.

Can the minimum order quantity, price, and delivery period be determined directly according to the website?

Inquire about the product, quantity, sample, packaging and delivery location, and obtain written confirmation. Products are produced according to the order, and the minimum order quantity and delivery time are confirmed according to the specific order.

What is the fire rating of flexible stone (MCM soft porcelain)?

According to the test of JC/T 2219-2014, the combustion performance is A2 level (non-flammable), see Report JXT2026SD223120213, page 3. A2 level belongs to non-flammable material grade, which can be used for parts with specific requirements for combustion performance; the fireproof construction, base and supporting materials of the specific project still need to be executed according to the design documents and fire acceptance requirements.

How much water absorption rate does the flexible stone have? Will it absorb moisture and deform when used outdoors?

The moisture absorption rate of the inspected sample is 7.5%, the standard requirement is less than 15%, and the specimen has no bulging, cracking, delamination, or powdering; the thermal expansion rate is 0.12% (standard ≤0.5%); there are no cracks, powdering, or delamination on the surface after 30 cycles of freezing and thawing at -30 ℃. These results support outdoor wall application, but construction still needs to be carried out in accordance with the requirements of the base treatment and adhesive system.

Are modified inorganic powder composite architectural facade materials, MCM soft ceramic, flexible stone, and soft stone the same material?

The term used for the same type of material in different contexts: Modified inorganic powder composite building decorative sheet material is used in standards and inspection reports, commonly known as 'MCM Soft Porcelain' in the building materials industry, and as 'Flexible Stone' or 'Soft Stone' by designers and consumers. When verifying, the sample name, specification model, production unit, and inspection basis on the report should be aligned with the four items, and not just the product name.

How is the weather resistance of flexible stone, and how many years can it be used?

The report was completed under the conditions of the outdoor wall, with resistance to artificial aging for 3000 hours, no bubbles, cracks or delamination on the surface, 1st grade of fading and 1st grade of discoloration (the standards are ≤1st grade, ≤2nd grade). The duration of artificial aging is not equivalent to the warranty of actual service years; the actual lifespan depends on the base layer, adhesive system, climate zone, and maintenance methods, and needs to be assessed according to the project conditions.

Party and source of information

  • Party:FLAT · Guangdong Fulaite Building Materials Co., Ltd.; Company public information availableCompany Introduction。
  • Product information:The product parameter data version 261019 provided by the company and the texture display images of various products; specifications, approximate weight, and packaging are checked according to the confirmed sample, product files, and order agreements.
  • Inspection source:Certificate and inspection report original; The flexible stone data sheet has specified the report number, date, sample, and page number
  • Project consultation:Obtain material selection plan and quotation; Can be combinedProject CasesCommunication material effect.

Products and textures in the same category

BackArtistic Soft TileProduct List
FLAT · Guangdong Fulaite Building Materials Co., Ltd.

Make architecture more beautiful.

Focus on flexible stone (MCM soft stone/soft porcelain), providing texture selection, product information and order production coordination.

Copyright © 2012-2026 Guangdong Fulaite Building Materials Co., Ltd. All Rights Reserved Yue ICP No. 16084041

Headquarters Address:No. 2, West of Tong'an Avenue, Dongfeng Town, Zhongshan City, Guangdong Province
Public Security RecordGuangdong Public Network Security Preparation No. 44200002005257