At present, more and more engineering companies have used texture coating to replace flat coating products, such as flat fluorocarbon paint, latex paint and other coatings. The popularity of textured coating is an inevitable trend, but also expected thing. Compared with other coatings, the construction of natural real stone paint and other texture coatings is relatively random, and there are many things that can be used. However, the construction process and construction scheme of real stone paint should also follow certain guidelines, otherwise the construction effect will be greatly reduced.
In the construction site of natural stone paint, there are many places where scaffolds are used. After the construction is completed and the scaffolds are removed, there will be scratches on the decoration wall or flowers caused by different construction. The operation level of each stone paint construction worker is different, and improper construction method will also affect the decoration effect of stone paint texture coating. After the coating is completely dry and solid, it will present a serious flower appearance. The quality of the environment will also affect the decoration effect of the genuine stone paint. The natural stone paint is attributed to the waterborne coating. The water is the dispersing medium, and the synthetic emulsion is the binder. It is relatively easy to be affected by the natural environment such as the climate. The low temperature will affect the film forming effect of the coating. The construction of the windshield and heavy rain days will also cause the coating of the texture coating to varying degrees.
During the construction of real stone paint, the hanging basket shall be used instead of the scaffold as much as possible, the construction joint shall be left at the grid line, the construction disconnection shall be left at the place not obvious on the wall as much as possible, or the paper with beautiful lines shall be pasted, removed after the spraying of real stone paint, and then the finished part shall be pasted with the paper with beautiful lines, so as to prevent the blooming caused by different coating
Before the construction of real stone paint, necessary training should be given to the construction personnel. Handle the parts that do not need construction, such as doors and windows, and prohibit cross construction
The standard construction environment requirements of real stone paint are as follows: the construction temperature is more than five degrees Celsius, the humidity is less than 80%, the construction shall not be carried out in windy days and rainy days as much as possible, and the construction shall not be carried out in foggy days or rainy days. Zhongshan fulette texture coating factory recommends that you pay more attention to the recent weather conditions before construction.