What is the amount of real stone paint per square meter? According to freight stone paint engineer, generally speaking, it is 3.5kg/m2, but it will change according to the specific situation, generally controlled at 3-5kg.
There are 30kg, 45kg and 75kg barrels of fulette real stone paint, which can be purchased according to their own construction area.
The amount of real stone paint is related to the quality of real stone paint, the technical proficiency of construction personnel, the skills of construction technology, and the selection of matching primer. Several factors affect the amount of real stone paint at the same time. Saving the amount in actual operation means saving the cost. How much real stone paint is usually used per square meter? How can we save money? The answer is just below.
The amount of real stone paint used is generally controlled at 3.5-4.5kg/m2, that is, the theoretical coating amount is 3.5-1.5kg/m2.
For example: construction personnel technology, brush thickness, what type of real stone paint.
In order to save the amount of real stone paint per square meter, we should at least start from the following aspects:
I. use high-quality real stone paint. According to the raw materials, the real stone paint includes styrene acrylic real stone paint, pure acrylic real stone paint and silicon acrylic real stone paint. Due to the strong adhesion, the high-quality real stone paint has less sand loss and strong covering power during construction, so the amount of use is less than the low-quality real stone paint.
II. Find skilled construction personnel. It is not enough to spray or roll paint the exterior wall real stone paint only using tools. It is also a knowledge. First, skilled workers have many skills, which can greatly save the amount of real stone paint. Second, the finished effect of the exterior wall real stone paint project is closely related to the construction, and the construction effect of skilled workers is better than that of new workers.
III. master the construction technology skills. In most cases, the spraying process is used for the real stone paint. In the construction process, the muzzle is 40-60cm away from the wall, and the size of the muzzle is reasonably adjusted. A small amount, even and many times of spraying will cause the wet wall effect if the muzzle is too close to the wall, and more sand will fall off if it is too far away. Therefore, the construction personnel shall reasonably construct according to the air pressure and muzzle size.
4. Select matching high-quality primer. Songshan paint not only produces natural stone paint, but also a series of matching products, such as putty powder, alkali resistant sealing primer, finishing agent, etc. The primer must be applied on the base layer to resist alkali and seal. Generally speaking, the black primer has the best effect as the pointing agent, but the stone paint used is the most, because the black bottom should be covered, while the amount of stone paint used in other colors is relatively small. If the primer is mixed to the same color as the stone paint, the amount can be reduced appropriately.